[PATCH] mfd: arizona: Drop legacy irq_gpio handling

Linus Walleij posted 1 patch 3 weeks, 2 days ago
drivers/mfd/arizona-irq.c         | 37 -------------------------------------
include/linux/mfd/arizona/pdata.h |  5 -----
2 files changed, 42 deletions(-)
[PATCH] mfd: arizona: Drop legacy irq_gpio handling
Posted by Linus Walleij 3 weeks, 2 days ago
It turns out nothing in the kernel defines this platform
data entry so just delete it along with all code handling
it.

Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/mfd/arizona-irq.c         | 37 -------------------------------------
 include/linux/mfd/arizona/pdata.h |  5 -----
 2 files changed, 42 deletions(-)

diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 544016d420fe..43d188a72ee2 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -136,21 +136,6 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
 			dev_err(arizona->dev,
 				"Failed to read main IRQ status: %d\n", ret);
 		}
-#ifdef CONFIG_GPIOLIB_LEGACY
-		/*
-		 * Poll the IRQ pin status to see if we're really done
-		 * if the interrupt controller can't do it for us.
-		 */
-		if (!arizona->pdata.irq_gpio) {
-			break;
-		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_RISING &&
-			   gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
-			poll = true;
-		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_FALLING &&
-			   !gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
-			poll = true;
-		}
-#endif
 	} while (poll);
 
 	pm_runtime_put_autosuspend(arizona->dev);
@@ -350,28 +335,6 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err_map_main_irq;
 	}
 
-#ifdef CONFIG_GPIOLIB_LEGACY
-	/* Used to emulate edge trigger and to work around broken pinmux */
-	if (arizona->pdata.irq_gpio) {
-		if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) {
-			dev_warn(arizona->dev, "IRQ %d is not GPIO %d (%d)\n",
-				 arizona->irq, arizona->pdata.irq_gpio,
-				 gpio_to_irq(arizona->pdata.irq_gpio));
-			arizona->irq = gpio_to_irq(arizona->pdata.irq_gpio);
-		}
-
-		ret = devm_gpio_request_one(arizona->dev,
-					    arizona->pdata.irq_gpio,
-					    GPIOF_IN, "arizona IRQ");
-		if (ret != 0) {
-			dev_err(arizona->dev,
-				"Failed to request IRQ GPIO %d:: %d\n",
-				arizona->pdata.irq_gpio, ret);
-			arizona->pdata.irq_gpio = 0;
-		}
-	}
-#endif
-
 	ret = request_threaded_irq(arizona->irq, NULL, arizona_irq_thread,
 				   flags, "arizona", arizona);
 
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index f72e6d4b14a7..20118bad869a 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -188,11 +188,6 @@ struct arizona_pdata {
 	/** Haptic actuator type */
 	unsigned int hap_act;
 
-#ifdef CONFIG_GPIOLIB_LEGACY
-	/** GPIO for primary IRQ (used for edge triggered emulation) */
-	int irq_gpio;
-#endif
-
 	/** General purpose switch control */
 	unsigned int gpsw;
 };

---
base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260314-mfd-arizona-irq-6fe7fe179a09

Best regards,
-- 
Linus Walleij <linusw@kernel.org>
Re: [PATCH] mfd: arizona: Drop legacy irq_gpio handling
Posted by Charles Keepax 3 weeks ago
On Sat, Mar 14, 2026 at 11:53:27PM +0100, Linus Walleij wrote:
> It turns out nothing in the kernel defines this platform
> data entry so just delete it along with all code handling
> it.

Should really also mention in the commit message that this is
removing the emulated edge triggered support from the driver. It
is not clear from this we are removing a feature.

This was definitely used out of tree, although in fairness that
was all sometime ago (~10 years). Makes me a little nervous but
probably ok to let it go now. I am at least not aware of anyone
who is keeping a platform using this going.

> --- a/drivers/mfd/arizona-irq.c
> +++ b/drivers/mfd/arizona-irq.c
> @@ -136,21 +136,6 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
>  			dev_err(arizona->dev,
>  				"Failed to read main IRQ status: %d\n", ret);
>  		}
> -#ifdef CONFIG_GPIOLIB_LEGACY
> -		/*
> -		 * Poll the IRQ pin status to see if we're really done
> -		 * if the interrupt controller can't do it for us.
> -		 */
> -		if (!arizona->pdata.irq_gpio) {
> -			break;
> -		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_RISING &&
> -			   gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
> -			poll = true;
> -		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_FALLING &&
> -			   !gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
> -			poll = true;
> -		}
> -#endif

With out this the whole loop becomes useless so you might as well
remove that as well.

Thanks,
Charles
Re: [PATCH] mfd: arizona: Drop legacy irq_gpio handling
Posted by Bartosz Golaszewski 3 weeks ago
On Sat, 14 Mar 2026 23:53:27 +0100, Linus Walleij <linusw@kernel.org> said:
> It turns out nothing in the kernel defines this platform
> data entry so just delete it along with all code handling
> it.
>
> Signed-off-by: Linus Walleij <linusw@kernel.org>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>