Hi Bjorn et al.

On s390, AtomicOp Requests are enabled on a PCI function that supports
them, despite the helper being ignorant about the root port's capability
to supporting their completion.

Patch 1: Fix the logic in pci_enable_atomic_ops_to_root()
Patch 2: Update references to PCIe spec in that function.

I did test that the issue is fixed with these patches. Also, I verified
that on a Mellanox/Nvidia ConnectX-6 adapter plugged straight into the
root port of a x86 system still gets AtomicOp Requests enabled.

Due to lacking the required hardware, I did not test this with any PCIe
switches between root port and endpoint. So test exposure to other
environments is highly appreciated.

Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
---
Changes in v4:
- drop patch 1 - it will become the base of a new series
- previous patch 2, now 1: reword commit message
- add a new patch to update references to PCI spec within
  pci_enable_atomic_ops_to_root()
- rebase to latest master
- Link to v3: https://lore.kernel.org/r/20260306-fix_pciatops-v3-0-99d12bcafb19@linux.ibm.com

Changes in v3:
- rebase to 7.0-rc2
- gentle ping
- add netdev and rdma lists for awareness
- Link to v2: https://lore.kernel.org/r/20251216-fix_pciatops-v2-0-d013e9b7e2ee@linux.ibm.com

Changes in v2:
- rebase to 6.19-rc1
- otherwise unchanged to v1
- Link to v1: https://lore.kernel.org/r/20251110-fix_pciatops-v1-0-edc58a57b62e@linux.ibm.com

---
Gerd Bayer (2):
      PCI: AtomicOps: Do not enable if root-port capabilities are unknown
      PCI: AtomicOps: Update references to PCIe spec

 drivers/pci/pci.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)
---
base-commit: 0257f64bdac7fdca30fa3cae0df8b9ecbec7733a
change-id: 20251106-fix_pciatops-7e8608eccb03

Best regards,
-- 
Gerd Bayer <gbayer@linux.ibm.com>