pci_read_bridge_io() and pci_read_bridge_mmio_pref() read bridge window
registers unconditionally. If the registers are hardwired to zero
(not implemented), both base and limit will be 0. Since (0 <= 0) is
true, a bogus window [mem 0x00000000-0x000fffff] or [io 0x0000-0x0fff]
gets created.
pci_read_bridge_windows() already detects unsupported windows by
testing register writability and sets io_window/pref_window flags
accordingly. Check these flags at the start of pci_read_bridge_io()
and pci_read_bridge_mmio_pref() to skip reading registers when the
window is not supported.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/all/20260113210259.GA715789@bhelgaas/
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
---
drivers/pci/probe.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index bccc7a4bdd79..4eacb741b4ec 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -395,6 +395,9 @@ static void pci_read_bridge_io(struct pci_dev *dev, struct resource *res,
unsigned long io_mask, io_granularity, base, limit;
struct pci_bus_region region;
+ if (!dev->io_window)
+ return;
+
io_mask = PCI_IO_RANGE_MASK;
io_granularity = 0x1000;
if (dev->io_window_1k) {
@@ -465,6 +468,9 @@ static void pci_read_bridge_mmio_pref(struct pci_dev *dev, struct resource *res,
pci_bus_addr_t base, limit;
struct pci_bus_region region;
+ if (!dev->pref_window)
+ return;
+
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
--
2.39.5On Thu, Mar 12, 2026 at 04:53:32PM +0000, Caleb James DeLisle wrote:
> pci_read_bridge_io() and pci_read_bridge_mmio_pref() read bridge window
> registers unconditionally. If the registers are hardwired to zero
> (not implemented), both base and limit will be 0. Since (0 <= 0) is
> true, a bogus window [mem 0x00000000-0x000fffff] or [io 0x0000-0x0fff]
> gets created.
>
> pci_read_bridge_windows() already detects unsupported windows by
> testing register writability and sets io_window/pref_window flags
> accordingly. Check these flags at the start of pci_read_bridge_io()
> and pci_read_bridge_mmio_pref() to skip reading registers when the
> window is not supported.
>
> Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
> Link: https://lore.kernel.org/all/20260113210259.GA715789@bhelgaas/
> Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
> Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
I'd like to apply this, but I don't understand what's going on here.
I instrumented a kernel to return zero for all reads of Root Port
prefetchable window registers, and it worked correctly: It didn't
create a bogus [mem 0x00000000-0x000fffff] window (see below for a
possible explanation), didn't claim to have assigned a prefetchable
window, and the 64-bit prefetchable BAR of the downstream device was
correctly placed in the non-prefetchable window.
I'm booting this in qemu, and the current behavior with a functional
prefetchable window is this:
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff]
pci 0000:00:1c.3: bridge window [mem 0xfd000000-0xfd1fffff 64bit pref]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 PCIe Endpoint
pci 0000:04:00.0: BAR 0 [mem 0xfe200000-0xfe203fff 64bit]
With the instrumented kernel where the prefetchable window registers
are effectively hardwired to zero, I see this:
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 PCIe Endpoint
pci 0000:04:00.0: BAR 0 [mem 0xfe200000-0xfe203fff 64bit]
So the 04:00.0 BAR 0 was put in the non-prefetchable window as we
would expect when there's no prefetchable window.
Either there's something else going on with EcoNet EN7528 or I don't
understand the explanation.
Based on the link above, Root Port 1 doesn't implement a prefetchable
window, but Linux thinks it does and puts a mt7615e WiFi device BAR in
the non-existent window, so it doesn't work. I assume RP 1 is
0001:00:01.0, and the mt7615e WiFi is 0001:01:00.0, and the mt7615e
doesn't work:
pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
pci 0001:00:01.0: PCI bridge to [bus 00]
pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff]
pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:00:01.0: PCI bridge to [bus 01-ff]
pci 0001:00:01.0: bridge window [mem 0x28000000-0x280fffff]: assigned
pci 0001:00:01.0: bridge window [mem 0x28100000-0x282fffff pref]: assigned
pci 0001:01:00.0: BAR 0 [mem 0x28100000-0x281fffff 64bit pref]: assigned
WARNING: CPU: 3 PID: 1777 at target-mipsel_24kc_musl/linux-econet_en7528/mt76-2025.11.06~eb567bc7/mt7615/eeprom.c:31 mt7615_eeprom_init+0x484/0x548 [mt7615_common]
mt7615e 0001:01:00.0: Firmware is not ready for download
The [mem 0x00000000-0x000fffff] window mentioned above is not a
hardware problem. This is the non-prefetchable window, which is
required for all bridges, and if it hasn't been initialized and
contains the power-up values, this is the window. So all this is
telling us is that there was no firmware that programmed the window
before Linux.
FWIW, I'll attach my instrumentation patches below. Maybe you can
similarly instrument your kernel to see the actual config accesses to
the RP in question.
Also, minor nit: Caleb appears to be the author, but the first
sign-off is from Ahmed, so the Author vs Signed-off-by order is wrong;
see
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?id=v6.19#n449
Bjorn
commit 012e94d89d10 ("PCI: Log config accesses")
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Sat Jan 24 12:46:02 2026 -0600
PCI: Log config accesses
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index b123da16b63b..8b03af748238 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -32,6 +32,49 @@ DEFINE_RAW_SPINLOCK(pci_lock);
# define pci_unlock_config(f) raw_spin_unlock_irqrestore(&pci_lock, f)
#endif
+/* domain, bus, dev, fn */
+static u64 pci_log_cfg_dev = (0LL << 32) | PCI_DEVID(0, PCI_DEVFN(0x1c, 3));
+
+#define PCI_CFG_FMT "pci %04x:%02x:%02x.%d: %s %#06x "
+#define PCI_CFG_FMT_1 PCI_CFG_FMT "%#04x\n"
+#define PCI_CFG_FMT_2 PCI_CFG_FMT "%#06x\n"
+#define PCI_CFG_FMT_4 PCI_CFG_FMT "%#010x\n"
+
+static void pci_log_cfg(struct pci_bus *bus, unsigned int devfn, char *op,
+ int pos, int len, u32 val, int res)
+{
+ u64 dev_match = ((u64) pci_domain_nr(bus) << 32) | devfn;
+ u32 domain = pci_log_cfg_dev >> 32;
+
+ if (pci_log_cfg_dev != dev_match)
+ return;
+
+ if (res) {
+ pr_info(PCI_CFG_FMT "failed (%d)\n",
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ op, pos, res);
+ return;
+ }
+
+ switch (len) {
+ case 1:
+ pr_info(PCI_CFG_FMT_1,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ op, pos, val);
+ break;
+ case 2:
+ pr_info(PCI_CFG_FMT_2,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ op, pos, val);
+ break;
+ default:
+ pr_info(PCI_CFG_FMT_4,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ op, pos, val);
+ break;
+ }
+}
+
#define PCI_OP_READ(size, type, len) \
int noinline pci_bus_read_config_##size \
(struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
@@ -50,6 +93,7 @@ int noinline pci_bus_read_config_##size \
else \
*value = (type)data; \
pci_unlock_config(flags); \
+ pci_log_cfg(bus, devfn, "rd", pos, len, (u32) *value, res); \
\
return res; \
}
@@ -67,6 +111,7 @@ int noinline pci_bus_write_config_##size \
pci_lock_config(flags); \
res = bus->ops->write(bus, devfn, pos, len, value); \
pci_unlock_config(flags); \
+ pci_log_cfg(bus, devfn, "wr", pos, len, value, res); \
\
return res; \
}
commit 744b78273da8 ("PCI: Override pref window reads to return 0")
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Fri Mar 13 10:39:27 2026 -0500
PCI: Override pref window reads to return 0
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 8b03af748238..675926bddc54 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -40,6 +40,43 @@ static u64 pci_log_cfg_dev = (0LL << 32) | PCI_DEVID(0, PCI_DEVFN(0x1c, 3));
#define PCI_CFG_FMT_2 PCI_CFG_FMT "%#06x\n"
#define PCI_CFG_FMT_4 PCI_CFG_FMT "%#010x\n"
+static int pci_override_cfg_rd(struct pci_bus *bus, unsigned int devfn,
+ int pos, int len, u32 *value)
+{
+ u64 dev_match = ((u64) pci_domain_nr(bus) << 32) | devfn;
+
+ if (pci_log_cfg_dev != dev_match)
+ return -ENODEV;
+
+ if (!(pos == 0x24 || pos == 0x26 || pos == 0x28 || pos == 0x2c))
+ return -ENODEV;
+
+ *value = 0;
+
+#if 0
+ u32 domain = pci_log_cfg_dev >> 32;
+ switch (len) {
+ case 1:
+ pr_info("override " PCI_CFG_FMT_1,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ "rd", pos, *value);
+ break;
+ case 2:
+ pr_info("override " PCI_CFG_FMT_2,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ "rd", pos, *value);
+ break;
+ default:
+ pr_info("override " PCI_CFG_FMT_4,
+ domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ "rd", pos, *value);
+ break;
+ }
+#endif
+
+ return 0;
+}
+
static void pci_log_cfg(struct pci_bus *bus, unsigned int devfn, char *op,
int pos, int len, u32 val, int res)
{
@@ -87,7 +124,9 @@ int noinline pci_bus_read_config_##size \
return PCIBIOS_BAD_REGISTER_NUMBER; \
\
pci_lock_config(flags); \
- res = bus->ops->read(bus, devfn, pos, len, &data); \
+ res = pci_override_cfg_rd(bus, devfn, pos, len, &data); \
+ if (res) \
+ res = bus->ops->read(bus, devfn, pos, len, &data); \
if (res) \
PCI_SET_ERROR_RESPONSE(value); \
else \
On Fri, Mar 13, 2026 at 11:20:00AM -0500, Bjorn Helgaas wrote:
> On Thu, Mar 12, 2026 at 04:53:32PM +0000, Caleb James DeLisle wrote:
> > pci_read_bridge_io() and pci_read_bridge_mmio_pref() read bridge window
> > registers unconditionally. If the registers are hardwired to zero
> > (not implemented), both base and limit will be 0. Since (0 <= 0) is
> > true, a bogus window [mem 0x00000000-0x000fffff] or [io 0x0000-0x0fff]
> > gets created.
> >
> > pci_read_bridge_windows() already detects unsupported windows by
> > testing register writability and sets io_window/pref_window flags
> > accordingly. Check these flags at the start of pci_read_bridge_io()
> > and pci_read_bridge_mmio_pref() to skip reading registers when the
> > window is not supported.
> >
> > Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
> > Link: https://lore.kernel.org/all/20260113210259.GA715789@bhelgaas/
> > Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
> > Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
>
> I'd like to apply this, but I don't understand what's going on here.
>
Thank you for testing this and sharing your instrumentation
patches. I applied the config access logging patch to the
EN7528 and captured the register trace (full log below).
> I instrumented a kernel to return zero for all reads of Root Port
> prefetchable window registers, and it worked correctly: It didn't
> create a bogus [mem 0x00000000-0x000fffff] window (see below for a
> possible explanation), didn't claim to have assigned a prefetchable
> window, and the 64-bit prefetchable BAR of the downstream device was
> correctly placed in the non-prefetchable window.
>
> I'm booting this in qemu, and the current behavior with a functional
> prefetchable window is this:
>
> pci 0000:00:1c.3: PCI bridge to [bus 04]
> pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff]
> pci 0000:00:1c.3: bridge window [mem 0xfd000000-0xfd1fffff 64bit pref]
> pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 PCIe Endpoint
> pci 0000:04:00.0: BAR 0 [mem 0xfe200000-0xfe203fff 64bit]
>
> With the instrumented kernel where the prefetchable window registers
> are effectively hardwired to zero, I see this:
>
> pci 0000:00:1c.3: PCI bridge to [bus 04]
> pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff]
> pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 PCIe Endpoint
> pci 0000:04:00.0: BAR 0 [mem 0xfe200000-0xfe203fff 64bit]
>
> So the 04:00.0 BAR 0 was put in the non-prefetchable window as we
> would expect when there's no prefetchable window.
>
This shows "64bit" without "pref" , so unless I'm
mistaken, the BAR is non-prefetchable. The issue only
triggers when a downstream device has prefetchable BARs,
like the mt7615e :
pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00003fff 64bit pref]
pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
> Either there's something else going on with EcoNet EN7528 or I don't
> understand the explanation.
>
The config trace shows the following sequence:
1) pci_read_bridge_windows() correctly detects the
prefetchable window is not supported:
rd 0x0024 0x00000000 # PCI_PREF_MEMORY_BASE
wr 0x0024 0xffe0fff0 # write test
rd 0x0024 0x00000000 # read back: still 0 -> pref_window = 0
wr 0x0024 0x00000000 # restore
2) Later, pci_read_bridge_bases() reads the same registers
again without checking pref_window:
rd 0x0024 0x0000 # PCI_PREF_MEMORY_BASE
rd 0x0026 0x0000 # PCI_PREF_MEMORY_LIMIT
# base(0) <= limit(0) -> bogus resource
3) The allocator assigns the bogus prefetchable window and
routes the mt7615e's prefetchable BARs through it:
bridge window [mem 0x28100000-0x282fffff pref]: assigned
BAR 0 [mem 0x28100000-0x281fffff 64bit pref]: assigned
BAR 2 [mem 0x28200000-0x28203fff 64bit pref]: assigned
BAR 4 [mem 0x28204000-0x28204fff 64bit pref]: assigned
4) The kernel programs the bridge, but the write doesn't
stick:
wr 0x0024 0x28202810 # program pref window
...
rd 0x0024 0x00000000 # read back: still 0
Compare with the non-prefetchable window, which
works:
wr 0x0020 0x28002800 # program non-prefetchable window
...
rd 0x0020 0x28002800 # read back: correct
> Based on the link above, Root Port 1 doesn't implement a prefetchable
> window, but Linux thinks it does and puts a mt7615e WiFi device BAR in
> the non-existent window, so it doesn't work. I assume RP 1 is
> 0001:00:01.0, and the mt7615e WiFi is 0001:01:00.0, and the mt7615e
> doesn't work:
Yes, that's correct.
>
> pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
> pci 0001:00:01.0: PCI bridge to [bus 00]
> pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff]
> pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> pci 0001:00:01.0: PCI bridge to [bus 01-ff]
> pci 0001:00:01.0: bridge window [mem 0x28000000-0x280fffff]: assigned
> pci 0001:00:01.0: bridge window [mem 0x28100000-0x282fffff pref]: assigned
> pci 0001:01:00.0: BAR 0 [mem 0x28100000-0x281fffff 64bit pref]: assigned
> WARNING: CPU: 3 PID: 1777 at target-mipsel_24kc_musl/linux-econet_en7528/mt76-2025.11.06~eb567bc7/mt7615/eeprom.c:31 mt7615_eeprom_init+0x484/0x548 [mt7615_common]
> mt7615e 0001:01:00.0: Firmware is not ready for download
>
> The [mem 0x00000000-0x000fffff] window mentioned above is not a
> hardware problem. This is the non-prefetchable window, which is
> required for all bridges, and if it hasn't been initialized and
> contains the power-up values, this is the window. So all this is
> telling us is that there was no firmware that programmed the window
> before Linux.
Understood , no firmware initializes the bridge before Linux
on this platform.
>
> FWIW, I'll attach my instrumentation patches below. Maybe you can
> similarly instrument your kernel to see the actual config accesses to
> the RP in question.
>
> Also, minor nit: Caleb appears to be the author, but the first
> sign-off is from Ahmed, so the Author vs Signed-off-by order is wrong;
> see
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?id=v6.19#n449
I'm the original author of this patch (from our earlier
discussion). Caleb included it in his series.
I could be wrong about the BAR difference being the key
factor. Please let me know if I'm missing something.
---
Full config access trace:
[ 0.636773] mtk-pcie 1fb81000.pcie: host bridge /pcie@1fb81000 ranges:
[ 0.643978] mtk-pcie 1fb81000.pcie: IO 0x001f600000..0x001f60ffff -> 0x0000000000
[ 0.652749] mtk-pcie 1fb81000.pcie: MEM 0x0020000000..0x0027ffffff -> 0x0020000000
[ 1.153150] mtk-pcie 1fb81000.pcie: PCI host bridge to bus 0000:00
[ 1.159915] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.165965] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.172716] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
[ 1.180497] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port
[ 1.188769] pci 0000:00:00.0: PCI bridge to [bus 00]
[ 1.194240] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.203834] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.213461] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 PCIe Endpoint
[ 1.221512] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[ 1.228966] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.236424] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.242226] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.249500] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]: assigned
[ 1.257674] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]: assigned
[ 1.266356] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]: assigned
[ 1.273817] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff]: assigned
[ 1.281279] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.286677] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 1.293420] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 1.300848] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
[ 1.308771] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.314864] pci_bus 0000:00: resource 5 [mem 0x20000000-0x27ffffff]
[ 1.321734] pci_bus 0000:01: resource 0 [io 0x0000-0x0fff]
[ 1.327818] pci_bus 0000:01: resource 1 [mem 0x20000000-0x200fffff]
[ 1.334727] pci_bus 0000:01: resource 2 [mem 0x20100000-0x201fffff pref]
[ 1.342649] OF: /pcie@1fb81000/pcie@0,0: Missing device_type
[ 1.349645] mtk-pcie 1fb81000.pcie: port0 link retrained
[ 1.355955] mtk-pcie 1fb83000.pcie: host bridge /pcie@1fb83000 ranges:
[ 1.363180] mtk-pcie 1fb83000.pcie: IO 0x001f610000..0x001f61ffff -> 0x0000000000
[ 1.371954] mtk-pcie 1fb83000.pcie: MEM 0x0028000000..0x002fffffff -> 0x0028000000
[ 1.519707] mtk-pcie 1fb83000.pcie: PCI host bridge to bus 0001:00
[ 1.526503] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 1.532485] pci_bus 0001:00: root bus resource [mem 0x28000000-0x2fffffff]
[ 1.540087] pci 0001:00:01.0: rd 0x0000 0x081114c3
[ 1.545309] pci 0001:00:01.0: rd 0x000e 0x01
[ 1.549957] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.554845] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.559504] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.564393] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.569243] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.574141] pci 0001:00:01.0: rd 0x0082 0x0142
[ 1.578984] pci 0001:00:01.0: rd 0x009e 0x0000
[ 1.583873] pci 0001:00:01.0: rd 0x0084 0x00008341
[ 1.589105] pci 0001:00:01.0: rd 0x008c 0x01608c12
[ 1.594412] pci 0001:00:01.0: rd 0x0008 0x06040002
[ 1.599609] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 1.604883] pci 0001:00:01.0: rd 0x0000 0x081114c3
[ 1.610111] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 1.615384] pci 0001:00:01.0: rd 0x00ac 0x00000000
[ 1.620636] pci 0001:00:01.0: rd 0x008c 0x01608c12
[ 1.625867] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
[ 1.633916] pci 0001:00:01.0: rd 0x0004 0x0000
[ 1.638758] pci 0001:00:01.0: wr 0x0004 0x0400
[ 1.643647] pci 0001:00:01.0: rd 0x0004 0x0400
[ 1.648497] pci 0001:00:01.0: wr 0x0004 0x0000
[ 1.653387] pci 0001:00:01.0: rd 0x003d 0x01
[ 1.658046] pci 0001:00:01.0: rd 0x003c 0x00
[ 1.662749] pci 0001:00:01.0: rd 0x0004 0x0000
[ 1.667594] pci 0001:00:01.0: rd 0x0010 0x00000000
[ 1.672866] pci 0001:00:01.0: wr 0x0010 0xffffffff
[ 1.678098] pci 0001:00:01.0: rd 0x0010 0x00000000
[ 1.683368] pci 0001:00:01.0: wr 0x0010 0x00000000
[ 1.688604] pci 0001:00:01.0: rd 0x0004 0x0000
[ 1.693497] pci 0001:00:01.0: rd 0x0014 0x00000000
[ 1.698722] pci 0001:00:01.0: wr 0x0014 0xffffffff
[ 1.703993] pci 0001:00:01.0: rd 0x0014 0x00000000
[ 1.709226] pci 0001:00:01.0: wr 0x0014 0x00000000
[ 1.714502] pci 0001:00:01.0: rd 0x0004 0x0000
[ 1.719348] pci 0001:00:01.0: rd 0x0038 0x00000000
[ 1.724619] pci 0001:00:01.0: wr 0x0038 0xfffff800
[ 1.729851] pci 0001:00:01.0: rd 0x0038 0x00000000
[ 1.735122] pci 0001:00:01.0: wr 0x0038 0x00000000
[ 1.740355] pci 0001:00:01.0: rd 0x0018 0x40000000
[ 1.745617] pci 0001:00:01.0: PCI bridge to [bus 00]
[ 1.751075] pci 0001:00:01.0: rd 0x001c 0x0000
[ 1.755918] pci 0001:00:01.0: wr 0x001c 0xe0f0
[ 1.760808] pci 0001:00:01.0: rd 0x001c 0x0000
[ 1.765658] pci 0001:00:01.0: wr 0x001c 0x0000
[ 1.770528] pci 0001:00:01.0: rd 0x0020 0x0000
[ 1.775399] pci 0001:00:01.0: rd 0x0022 0x0000
[ 1.780259] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.787735] pci 0001:00:01.0: rd 0x0024 0x00000000
[ 1.792986] pci 0001:00:01.0: wr 0x0024 0xffe0fff0
[ 1.798219] pci 0001:00:01.0: rd 0x0024 0x00000000
[ 1.803490] pci 0001:00:01.0: wr 0x0024 0x00000000
[ 1.808724] pci 0001:00:01.0: rd 0x0094 0x00040000
[ 1.814000] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.818844] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.823546] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.828392] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.833282] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.838134] pci 0001:00:01.0: rd 0x0084 0x00008341
[ 1.843405] pci 0001:00:01.0: rd 0x0088 0x2810
[ 1.848255] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 1.853525] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 1.858758] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 1.864028] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 1.869262] pci 0001:00:01.0: rd 0x003e 0x0000
[ 1.874162] pci 0001:00:01.0: wr 0x003e 0x0002
[ 1.879022] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.883890] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.888549] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.893438] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.898288] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.903178] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.908028] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.912726] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.917577] pci 0001:00:01.0: rd 0x0052 0x0080
[ 1.922467] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.927316] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.932026] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.936864] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.941754] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.946605] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.951494] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.956153] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.961042] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.965892] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.970783] pci 0001:00:01.0: rd 0x0006 0x0010
[ 1.975632] pci 0001:00:01.0: rd 0x0034 0x50
[ 1.980311] pci 0001:00:01.0: rd 0x0050 0x7805
[ 1.985204] pci 0001:00:01.0: rd 0x0078 0x8001
[ 1.990050] pci 0001:00:01.0: rd 0x0080 0x0010
[ 1.994948] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.000172] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.005444] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.010695] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.015927] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.021200] pci 0001:00:01.0: rd 0x0104 0x00000000
[ 2.026431] pci 0001:00:01.0: rd 0x0110 0x00000000
[ 2.031703] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.036936] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.042210] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.047439] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.052334] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.056986] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.061876] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.066726] pci 0001:00:01.0: rd 0x007a 0x01c3
[ 2.071617] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.076466] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.081355] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.086014] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.090903] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.095753] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.100648] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.105875] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.111158] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.115997] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.120695] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.125545] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.130415] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.135305] pci 0001:00:01.0: rd 0x007c 0x0008
[ 2.140333] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.145549] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.150804] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.156031] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.161303] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.166535] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.171814] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.177038] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.182310] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.187542] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.192814] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.198045] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.204240] pci 0001:00:01.0: rd 0x0018 0x40000000
[ 2.209446] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.218262] pci 0001:00:01.0: rd 0x003e 0x0002
[ 2.223130] pci 0001:00:01.0: wr 0x003e 0x0002
[ 2.227976] pci 0001:00:01.0: wr 0x0018 0x40000000
[ 2.233257] pci 0001:00:01.0: wr 0x001e 0xffff
[ 2.238097] pci 0001:00:01.0: wr 0x003e 0x0002
[ 2.242987] pci 0001:00:01.0: rd 0x0018 0x40000000
[ 2.248219] pci 0001:00:01.0: rd 0x003e 0x0002
[ 2.253108] pci 0001:00:01.0: wr 0x003e 0x0002
[ 2.257958] pci 0001:00:01.0: wr 0x0006 0xffff
[ 2.262853] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.267699] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.272397] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.277246] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.282136] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.287004] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.291883] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.296535] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.301424] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.306274] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.311164] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.316014] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.320717] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.325562] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.330432] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.335322] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.340172] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.344871] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.349720] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.354617] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.359461] pci 0001:00:01.0: rd 0x008c 0x01608c12
[ 2.364732] pci 0001:00:01.0: rd 0x0092 0x1011
[ 2.369713] pci 0001:00:01.0: wr 0x0018 0x40ff0100
[ 2.375175] pci 0001:01:00.0: [14c3:7663] type 00 class 0x000280 PCIe Endpoint
[ 2.383246] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
[ 2.390849] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00003fff 64bit pref]
[ 2.398430] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
[ 2.406031] pci 0001:00:01.0: rd 0x0088 0x2810
[ 2.411473] pci 0001:01:00.0: supports D1 D2
[ 2.416074] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.423461] pci 0001:00:01.0: rd 0x00a4 0x00000000
[ 2.428718] pci 0001:00:01.0: rd 0x0092 0x1011
[ 2.433539] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 2.449948] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.455157] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.460391] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.465661] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.471422] pci 0001:00:01.0: PCI bridge to [bus 01-ff]
[ 2.477117] pci 0001:00:01.0: rd 0x001c 0x00
[ 2.481812] pci 0001:00:01.0: rd 0x001d 0x00
[ 2.486467] pci 0001:00:01.0: rd 0x0020 0x0000
[ 2.491359] pci 0001:00:01.0: rd 0x0022 0x0000
[ 2.496206] pci 0001:00:01.0: rd 0x0024 0x0000
[ 2.501095] pci 0001:00:01.0: rd 0x0026 0x0000
[ 2.505941] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.513222] pci 0001:00:01.0: wr 0x001a 0x01
[ 2.517882] pci 0001:00:01.0: wr 0x001e 0xffff
[ 2.522769] pci 0001:00:01.0: wr 0x003e 0x0002
[ 2.527647] pci 0001:00:01.0: bridge window [mem 0x28000000-0x280fffff]: assigned
[ 2.535854] pci 0001:00:01.0: bridge window [mem 0x28100000-0x282fffff pref]: assigned
[ 2.544537] pci 0001:00:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2.553124] pci 0001:00:01.0: bridge window [io size 0x1000]: failed to assign
[ 2.561156] pci 0001:01:00.0: BAR 0 [mem 0x28100000-0x281fffff 64bit pref]: assigned
[ 2.569715] pci 0001:01:00.0: BAR 2 [mem 0x28200000-0x28203fff 64bit pref]: assigned
[ 2.578250] pci 0001:01:00.0: BAR 4 [mem 0x28204000-0x28204fff 64bit pref]: assigned
[ 2.586781] pci 0001:00:01.0: PCI bridge to [bus 01]
[ 2.592188] pci 0001:00:01.0: wr 0x0030 0x0000ffff
[ 2.597412] pci 0001:00:01.0: wr 0x001c 0x00f0
[ 2.602305] pci 0001:00:01.0: wr 0x0030 0x00000000
[ 2.607524] pci 0001:00:01.0: bridge window [mem 0x28000000-0x280fffff]
[ 2.615001] pci 0001:00:01.0: wr 0x0020 0x28002800
[ 2.620233] pci 0001:00:01.0: wr 0x002c 0x00000000
[ 2.625495] pci 0001:00:01.0: bridge window [mem 0x28100000-0x282fffff pref]
[ 2.633429] pci 0001:00:01.0: wr 0x0024 0x28202810
[ 2.638661] pci 0001:00:01.0: wr 0x0028 0x00000000
[ 2.643932] pci 0001:00:01.0: wr 0x002c 0x00000000
[ 2.649165] pci 0001:00:01.0: wr 0x003e 0x0002
[ 2.654057] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 2.663977] pci_bus 0001:00: resource 4 [mem 0x28000000-0x2fffffff]
[ 2.670850] pci_bus 0001:01: resource 1 [mem 0x28000000-0x280fffff]
[ 2.677705] pci_bus 0001:01: resource 2 [mem 0x28100000-0x282fffff pref]
[ 2.685092] pci 0001:00:01.0: rd 0x0000 0x081114c3
[ 2.690319] pci 0001:00:01.0: rd 0x0004 0x00100000
[ 2.695591] pci 0001:00:01.0: rd 0x0008 0x06040002
[ 2.700842] pci 0001:00:01.0: rd 0x000c 0x00010000
[ 2.706075] pci 0001:00:01.0: rd 0x0010 0x00000000
[ 2.711357] pci 0001:00:01.0: rd 0x0014 0x00000000
[ 2.716578] pci 0001:00:01.0: rd 0x0018 0x40010100
[ 2.721850] pci 0001:00:01.0: rd 0x001c 0x04200000
[ 2.727081] pci 0001:00:01.0: rd 0x0020 0x28002800
[ 2.732353] pci 0001:00:01.0: rd 0x0024 0x00000000
[ 2.737585] pci 0001:00:01.0: rd 0x0028 0x00000000
[ 2.742856] pci 0001:00:01.0: rd 0x002c 0x00000000
[ 2.748088] pci 0001:00:01.0: rd 0x0030 0x00000000
[ 2.753360] pci 0001:00:01.0: rd 0x0034 0x00000050
[ 2.758592] pci 0001:00:01.0: rd 0x0038 0x00000000
[ 2.763867] pci 0001:00:01.0: rd 0x003c 0x00020100
[ 2.769097] pci 0001:00:01.0: rd 0x0088 0x2810
[ 2.773992] pci 0001:00:01.0: rd 0x0090 0x0008
[ 2.778835] pci 0001:00:01.0: rd 0x0098 0x0000
[ 2.783725] pci 0001:00:01.0: rd 0x009c 0x0000
[ 2.788575] pci 0001:00:01.0: rd 0x00a8 0x0000
[ 2.793464] pci 0001:00:01.0: rd 0x00b0 0x0002
[ 2.798316] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.803586] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.808819] pci 0001:00:01.0: rd 0x0006 0x0010
[ 2.813707] pci 0001:00:01.0: rd 0x0034 0x50
[ 2.818367] pci 0001:00:01.0: rd 0x0050 0x7805
[ 2.823260] pci 0001:00:01.0: rd 0x0078 0x8001
[ 2.828106] pci 0001:00:01.0: rd 0x0080 0x0010
[ 2.833004] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.838227] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.843499] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.848732] pci 0001:00:01.0: rd 0x0104 0x00000000
[ 2.854003] pci 0001:00:01.0: rd 0x0110 0x00000000
[ 2.859235] pci 0001:00:01.0: rd 0x0104 0x00000000
[ 2.864506] pci 0001:00:01.0: rd 0x010c 0x0000
[ 2.869356] pci 0001:00:01.0: rd 0x0110 0x00000000
[ 2.874632] pci 0001:00:01.0: rd 0x0114 0x800000ff
[ 2.879860] pci 0001:00:01.0: rd 0x0100 0x40010002
[ 2.885131] pci 0001:00:01.0: rd 0x0400 0x0001001e
[ 2.891056] pci 0001:00:01.0: rd 0x040c 0x00000028
[ 2.896268] pci 0001:00:01.0: rd 0x0408 0x00002800
[ 2.901807] pci 0001:00:01.0: rd 0x0092 0x1011
[ 2.906614] pci 0001:00:01.0: rd 0x0090 0x0008
[ 2.911487] pci 0001:00:01.0: wr 0x0090 0x0028
[ 2.916375] pci 0001:00:01.0: rd 0x0092 0x1012
[ 2.921242] pci 0001:00:01.0: wr 0x0092 0x4000
[ 2.926084] mtk-pcie 1fb83000.pcie: port1 link retrained
[ 17.276926] pci 0000:00:00.0: enabling device (0000 -> 0003)
[ 17.282837] mt7603e 0000:01:00.0: enabling device (0000 -> 0002)
[ 17.289210] mt7603e 0000:01:00.0: ASIC revision: 76030010
[ 17.301145] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[ 17.306779] mt7603e 0000:01:00.0: Build Time: 20160107100755
[ 17.350617] mt7603e 0000:01:00.0: firmware init done
[ 17.520491] mt7603e 0000:01:00.0: registering led 'mt76-phy0'
[ 17.708582] pci 0001:00:01.0: rd 0x007c 0x0008
[ 17.713304] pci 0001:00:01.0: rd 0x0004 0x0000
[ 17.717826] pci 0001:00:01.0: enabling device (0000 -> 0002)
[ 17.723627] pci 0001:00:01.0: wr 0x0004 0x0002
[ 17.728145] pci 0001:00:01.0: rd 0x003d 0x01
[ 17.732504] pci 0001:00:01.0: rd 0x0004 0x0002
[ 17.736995] pci 0001:00:01.0: rd 0x0004 0x0002
[ 17.741522] pci 0001:00:01.0: wr 0x0004 0x0006
[ 17.746040] mt7615e 0001:01:00.0: enabling device (0000 -> 0002)
[ 17.752773] pci 0001:00:01.0: rd 0x0090 0x0008
[ 17.763241] ------------[ cut here ]------------
[ 17.767961] WARNING: CPU: 0 PID: 591 at target-mipsel_24kc_musl/linux-econet_en7528/mt76-2026.03.01~ee84094d/mt7615/eeprom.c:31 mt7615_eeprom_init+0x484/0x548 [mt7615_common]
[ 17.783821] Modules linked in: mt7615e(O+) mt7615_common(O) mt7603e(O) mt76_connac_lib(O) mt76(O) mac80211(O) cfg80211(O) slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat(O) econet_eth(O) i2c_dev i2c_core cryptodev(O) nls_utf8 nls_iso8859_1 nls_cp437 sha512_generic seqiv sha3_generic jitterentropy_rng drbg hmac geniv rng cmac sd_mod scsi_mod scsi_common gpio_button_hotplug(O) vfat fat nls_base crc32c_generic
[ 17.826914] CPU: 0 UID: 0 PID: 591 Comm: kmodloader Tainted: G O 6.12.74 #0
[ 17.826959] Tainted: [O]=OOT_MODULE
[ 17.826967] Hardware name: DASAN H660GM-A (Airtel)
[ 17.826978] Stack : 000001d5 00000004 0000000c 8188c80c 80e09b3c 8102cf8c 00000001 01000000
[ 17.827045] 00000000 00000000 00000000 00000000 00000000 00000001 80e09ae8 80848c40
[ 17.827097] 00000000 00000000 8184bd54 80e09970 ffffefff 00000000 8192e928 000001d6
[ 17.827153] 80e099bc 000001d8 8192e958 fffffffa 00000001 00000000 8184bd54 00000000
[ 17.827209] 00000000 83508374 81927330 00000400 00000003 fffc6467 00000000 81af0000
[ 17.827264] ...
[ 17.827279] Call Trace:
[ 17.827285] [<81006788>] show_stack+0x28/0xf0
[ 17.827338] [<81756b3c>] dump_stack_lvl+0x70/0xb0
[ 17.827364] [<8102d7f8>] __warn+0x9c/0x114
[ 17.827408] [<8102d998>] warn_slowpath_fmt+0x128/0x188
[ 17.827440] [<83508374>] mt7615_eeprom_init+0x484/0x548 [mt7615_common]
[ 17.827488] [<8320c2c8>] mt7615_register_device+0xb0/0x230 [mt7615e]
[ 17.827531] [<8320e140>] mt7615_mmio_probe+0x184/0x244 [mt7615e]
[ 17.827564] [<8320c12c>] mt7615e_reg_map+0x2481fdc/0x24820c8 [mt7615e]
[ 17.827643] [<81455d70>] pci_device_probe+0x90/0x130
[ 17.827690] [<814b0adc>] really_probe+0xc4/0x350
[ 17.827727] [<814b1044>] driver_probe_device+0x48/0x110
[ 17.827753] [<814b12d4>] __driver_attach+0xb0/0x180
[ 17.827778] [<814ae560>] bus_for_each_dev+0x70/0xb8
[ 17.827801] [<814afbdc>] bus_add_driver+0xf8/0x224
[ 17.827824] [<814b1ecc>] driver_register+0x88/0x154
[ 17.827853] [<81000644>] do_one_initcall+0x50/0x2b8
[ 17.827874] [<810b7fe8>] do_init_module+0x5c/0x234
[ 17.827924] [<810ba2d8>] sys_init_module+0x170/0x22c
[ 17.827954] [<8101104c>] syscall_common+0x34/0x58
[ 17.827982]
[ 17.827990] ---[ end trace 0000000000000000 ]---
[ 18.001416] mt7615e 0001:01:00.0: registering led 'mt76-phy1'
[ 18.184554] mt7615e 0001:01:00.0: Firmware is not ready for download
Ahmed Naseef
>
> Bjorn
>
>
> commit 012e94d89d10 ("PCI: Log config accesses")
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Sat Jan 24 12:46:02 2026 -0600
>
> PCI: Log config accesses
>
>
> diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> index b123da16b63b..8b03af748238 100644
> --- a/drivers/pci/access.c
> +++ b/drivers/pci/access.c
> @@ -32,6 +32,49 @@ DEFINE_RAW_SPINLOCK(pci_lock);
> # define pci_unlock_config(f) raw_spin_unlock_irqrestore(&pci_lock, f)
> #endif
>
> +/* domain, bus, dev, fn */
> +static u64 pci_log_cfg_dev = (0LL << 32) | PCI_DEVID(0, PCI_DEVFN(0x1c, 3));
> +
> +#define PCI_CFG_FMT "pci %04x:%02x:%02x.%d: %s %#06x "
> +#define PCI_CFG_FMT_1 PCI_CFG_FMT "%#04x\n"
> +#define PCI_CFG_FMT_2 PCI_CFG_FMT "%#06x\n"
> +#define PCI_CFG_FMT_4 PCI_CFG_FMT "%#010x\n"
> +
> +static void pci_log_cfg(struct pci_bus *bus, unsigned int devfn, char *op,
> + int pos, int len, u32 val, int res)
> +{
> + u64 dev_match = ((u64) pci_domain_nr(bus) << 32) | devfn;
> + u32 domain = pci_log_cfg_dev >> 32;
> +
> + if (pci_log_cfg_dev != dev_match)
> + return;
> +
> + if (res) {
> + pr_info(PCI_CFG_FMT "failed (%d)\n",
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + op, pos, res);
> + return;
> + }
> +
> + switch (len) {
> + case 1:
> + pr_info(PCI_CFG_FMT_1,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + op, pos, val);
> + break;
> + case 2:
> + pr_info(PCI_CFG_FMT_2,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + op, pos, val);
> + break;
> + default:
> + pr_info(PCI_CFG_FMT_4,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + op, pos, val);
> + break;
> + }
> +}
> +
> #define PCI_OP_READ(size, type, len) \
> int noinline pci_bus_read_config_##size \
> (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
> @@ -50,6 +93,7 @@ int noinline pci_bus_read_config_##size \
> else \
> *value = (type)data; \
> pci_unlock_config(flags); \
> + pci_log_cfg(bus, devfn, "rd", pos, len, (u32) *value, res); \
> \
> return res; \
> }
> @@ -67,6 +111,7 @@ int noinline pci_bus_write_config_##size \
> pci_lock_config(flags); \
> res = bus->ops->write(bus, devfn, pos, len, value); \
> pci_unlock_config(flags); \
> + pci_log_cfg(bus, devfn, "wr", pos, len, value, res); \
> \
> return res; \
> }
> commit 744b78273da8 ("PCI: Override pref window reads to return 0")
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Fri Mar 13 10:39:27 2026 -0500
>
> PCI: Override pref window reads to return 0
>
>
> diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> index 8b03af748238..675926bddc54 100644
> --- a/drivers/pci/access.c
> +++ b/drivers/pci/access.c
> @@ -40,6 +40,43 @@ static u64 pci_log_cfg_dev = (0LL << 32) | PCI_DEVID(0, PCI_DEVFN(0x1c, 3));
> #define PCI_CFG_FMT_2 PCI_CFG_FMT "%#06x\n"
> #define PCI_CFG_FMT_4 PCI_CFG_FMT "%#010x\n"
>
> +static int pci_override_cfg_rd(struct pci_bus *bus, unsigned int devfn,
> + int pos, int len, u32 *value)
> +{
> + u64 dev_match = ((u64) pci_domain_nr(bus) << 32) | devfn;
> +
> + if (pci_log_cfg_dev != dev_match)
> + return -ENODEV;
> +
> + if (!(pos == 0x24 || pos == 0x26 || pos == 0x28 || pos == 0x2c))
> + return -ENODEV;
> +
> + *value = 0;
> +
> +#if 0
> + u32 domain = pci_log_cfg_dev >> 32;
> + switch (len) {
> + case 1:
> + pr_info("override " PCI_CFG_FMT_1,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + "rd", pos, *value);
> + break;
> + case 2:
> + pr_info("override " PCI_CFG_FMT_2,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + "rd", pos, *value);
> + break;
> + default:
> + pr_info("override " PCI_CFG_FMT_4,
> + domain, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
> + "rd", pos, *value);
> + break;
> + }
> +#endif
> +
> + return 0;
> +}
> +
> static void pci_log_cfg(struct pci_bus *bus, unsigned int devfn, char *op,
> int pos, int len, u32 val, int res)
> {
> @@ -87,7 +124,9 @@ int noinline pci_bus_read_config_##size \
> return PCIBIOS_BAD_REGISTER_NUMBER; \
> \
> pci_lock_config(flags); \
> - res = bus->ops->read(bus, devfn, pos, len, &data); \
> + res = pci_override_cfg_rd(bus, devfn, pos, len, &data); \
> + if (res) \
> + res = bus->ops->read(bus, devfn, pos, len, &data); \
> if (res) \
> PCI_SET_ERROR_RESPONSE(value); \
> else \
© 2016 - 2026 Red Hat, Inc.