Freescale i.MX8 PCIe host controller bindings, through referenced
snps,dw-pcie-common.yaml schema, already document "reset-gpios", just
like Linux kernel did for a long time.  Use the preferred form over
"reset-gpio" which is deprecated since commit 42694f9f6407
("dt-bindings: PCI: add snps,dw-pcie.yaml") in 2021.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index dadc136aec6e..2595181504f4 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -802,7 +802,7 @@ &pciea {
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pciea>;
 	pinctrl-names = "default";
-	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pciea>;
 	vpcie3v3aux-supply = <&reg_pciea>;
 	supports-clkreq;
@@ -814,7 +814,7 @@ &pcieb {
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
-	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

-- 
2.51.0