Hi,

this series adds support for parallel and LVDS displays on MBa91xxCA, both for
TQMa91 and TQMa93. The parallel display is attached directly, while the LVDS
uses an LVDS-Encoder. To actually work it needs the pdfc driver from [1].

The first two patches add required (Video) PLL configurations to achieve the
necessary pixel clocks for both displays.
The last 4 patches add the overlays for TQMa91 and TQMa93, although the
overlays for TQMa91 use the same overlay for TQMa93.

Best regards,
Alexander

[1] https://lore.kernel.org/all/20260303-v6-18-topic-imx93-parallel-display-v11-2-1b03733c8461@pengutronix.de/

Alexander Stein (6):
  clk: imx: fracn-gppll: Add 333.333333 MHz support
  clk: imx: fracn-gppll: Add 477.4MHz support
  arm64: dts: imx93-tqma9352-mba91xxca: Add parallel display overlay
  arm64: dts: imx93-tqma9352-mba91xxca: Add LVDS display overlay
  arm64: dts: imx91-tqma9131-mba91xxca: Add parallel display overlay
  arm64: dts: imx91-tqma9131-mba91xxca: Add LVDS display overlay

 arch/arm64/boot/dts/freescale/Makefile        | 12 ++++
 ...3-tqma9352-mba91xxca-lvds-tm070jvhg33.dtso | 56 ++++++++++++++++
 ...93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtso | 66 +++++++++++++++++++
 drivers/clk/imx/clk-fracn-gppll.c             |  2 +
 4 files changed, 136 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtso

-- 
2.43.0