Add device tree overlay to enable ICSSG0 dual EMAC support on AM642 EVM.
This overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
dual EMAC mode.
Users can combine this with the existing ICSSG1 overlay to enable all four
ICSSG interfaces if needed.
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
---
v3-v2
- Remove the aliases as they are not applicable for the overlay
- Address all comments from Vignesh Raghavendra <vigneshr@ti.com> and ran DT checks
arch/arm64/boot/dts/ti/Makefile | 4 +
.../boot/dts/ti/k3-am642-evm-icssg0.dtso | 168 ++++++++++++++++++
2 files changed, 172 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index ba01a929e06f..d2cd124a5b08 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
# Boards with AM64x SoC
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg0.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-pcie0-ep.dtbo
@@ -218,6 +219,8 @@ k3-am62p5-sk-csi2-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-ov5640.dtbo
k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am642-evm-icssg0-dtbs := \
+ k3-am642-evm.dtb k3-am642-evm-icssg0.dtbo
k3-am642-evm-icssg1-dualemac-dtbs := \
k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
k3-am642-evm-icssg1-dualemac-mii-dtbs := \
@@ -306,6 +309,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-imx219.dtb \
k3-am62p5-sk-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-tevi-ov5640.dtb \
+ k3-am642-evm-icssg0.dtb \
k3-am642-evm-icssg1-dualemac.dtb \
k3-am642-evm-icssg1-dualemac-mii.dtb \
k3-am642-evm-pcie0-ep.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
new file mode 100644
index 000000000000..f19acf1896c3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for enabling ICSSG0 dual EMAC on AM642 EVM
+ *
+ * AM642 EVM Product link: https://www.ti.com/tool/TMDS64EVM
+ * DP83TG720 daughter card link: https://www.ti.com/tool/DP83TG720-IND-SPE-EVM
+ *
+ * Copyright (C) 2020-2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am642-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg0_rgmii1_pins_default>, <&pru_icssg0_rgmii2_pins_default>;
+ sram = <&oc_sram>;
+
+ dmas = <&main_pktdma 0xc100 0>, /* egress slice 0 */
+ <&main_pktdma 0xc101 0>, /* egress slice 0 */
+ <&main_pktdma 0xc102 0>, /* egress slice 0 */
+ <&main_pktdma 0xc103 0>, /* egress slice 0 */
+ <&main_pktdma 0xc104 0>, /* egress slice 1 */
+ <&main_pktdma 0xc105 0>, /* egress slice 1 */
+ <&main_pktdma 0xc106 0>, /* egress slice 1 */
+ <&main_pktdma 0xc107 0>, /* egress slice 1 */
+ <&main_pktdma 0x4100 0>, /* ingress slice 0 */
+ <&main_pktdma 0x4101 0>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+ ti,pa-stats = <&icssg0_pa_stats>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy00>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&main_conf 0x4100>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy01>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&main_conf 0x4104>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+ pru_icssg0_mdio_pins_default: pru-icssg0-mdio-pins {
+ pinctrl-single,pins = <
+ /* (P3) PRG0_MDIO0_MDC */
+ AM64X_IOPAD(0x0204, PIN_OUTPUT, 0)
+ /* (P2) PRG0_MDIO0_MDIO */
+ AM64X_IOPAD(0x0200, PIN_INPUT, 0)
+ /* (P16) GPIO0_32 - GPMC0_ADVn_ALE - GPIO_ETH0/1_RESETn# */
+ AM64X_IOPAD(0x0084, PIN_OUTPUT, 7)
+ >;
+ };
+
+ pru_icssg0_rgmii1_pins_default: pru-icssg0-rgmii1-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0160, PIN_INPUT, 2) /* (Y1) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM64X_IOPAD(0x0164, PIN_INPUT, 2) /* (R4) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM64X_IOPAD(0x0168, PIN_INPUT, 2) /* (U2) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM64X_IOPAD(0x016c, PIN_INPUT, 2) /* (V2) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM64X_IOPAD(0x0178, PIN_INPUT, 2) /* (T3) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM64X_IOPAD(0x0170, PIN_INPUT, 2) /* (AA2) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ AM64X_IOPAD(0x018c, PIN_OUTPUT, 2) /* (Y3) PRG0_PRU0_GPO11.PRG0_RGMII1_TD0 */
+ AM64X_IOPAD(0x0190, PIN_OUTPUT, 2) /* (AA3) PRG0_PRU0_GPO12.PRG0_RGMII1_TD1 */
+ AM64X_IOPAD(0x0194, PIN_OUTPUT, 2) /* (R6) PRG0_PRU0_GPO13.PRG0_RGMII1_TD2 */
+ AM64X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (V4) PRG0_PRU0_GPO14.PRG0_RGMII1_TD3 */
+ AM64X_IOPAD(0x01a0, PIN_OUTPUT, 2) /* (U4) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM64X_IOPAD(0x019c, PIN_OUTPUT, 2) /* (T5) PRG0_PRU0_GPO15.PRG0_RGMII1_TX_CTL */
+ >;
+ };
+
+ pru_icssg0_rgmii2_pins_default: pru-icssg0-rgmii2-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x01b0, PIN_INPUT, 2) /* (Y2) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM64X_IOPAD(0x01b4, PIN_INPUT, 2) /* (W2) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM64X_IOPAD(0x01b8, PIN_INPUT, 2) /* (V3) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM64X_IOPAD(0x01bc, PIN_INPUT, 2) /* (T4) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM64X_IOPAD(0x01c8, PIN_INPUT, 2) /* (R5) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM64X_IOPAD(0x01c0, PIN_INPUT, 2) /* (W3) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+ AM64X_IOPAD(0x01dc, PIN_OUTPUT, 2) /* (W4) PRG0_PRU1_GPO11.PRG0_RGMII2_TD0 */
+ AM64X_IOPAD(0x01e0, PIN_OUTPUT, 2) /* (Y4) PRG0_PRU1_GPO12.PRG0_RGMII2_TD1 */
+ AM64X_IOPAD(0x01e4, PIN_OUTPUT, 2) /* (T6) PRG0_PRU1_GPO13.PRG0_RGMII2_TD2 */
+ AM64X_IOPAD(0x01e8, PIN_OUTPUT, 2) /* (U6) PRG0_PRU1_GPO14.PRG0_RGMII2_TD3 */
+ AM64X_IOPAD(0x01f0, PIN_OUTPUT, 2) /* (AA4) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM64X_IOPAD(0x01ec, PIN_OUTPUT, 2) /* (U5) PRG0_PRU1_GPO15.PRG0_RGMII2_TX_CTL */
+ >;
+ };
+
+ icssg0_iep0_pins_default: icssg0-iep0-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x01ac, PIN_OUTPUT, 2) /* (W1) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg0_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_phy00: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ icssg0_phy01: ethernet-phy@a {
+ reg = <0xa>;
+ };
+};
+
+&icssg0_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&main_gpio0 {
+ phy-line-hog {
+ gpio-hog;
+ gpios = <32 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "phy-hog-line";
+ };
+};
--
2.43.0Hi
[...]
On 11/03/26 11:08, Meghana Malladi wrote
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
> new file mode 100644
> index 000000000000..f19acf1896c3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/**
> + * DT overlay for enabling ICSSG0 dual EMAC on AM642 EVM
> + *
> + * AM642 EVM Product link: https://www.ti.com/tool/TMDS64EVM
> + * DP83TG720 daughter card link: https://www.ti.com/tool/DP83TG720-IND-SPE-EVM
> + *
> + * Copyright (C) 2020-2026 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> + icssg0_eth: icssg0-eth {
> + compatible = "ti,am642-icssg-prueth";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pru_icssg0_rgmii1_pins_default>, <&pru_icssg0_rgmii2_pins_default>;
> + sram = <&oc_sram>;
> +
> + dmas = <&main_pktdma 0xc100 0>, /* egress slice 0 */
> + <&main_pktdma 0xc101 0>, /* egress slice 0 */
> + <&main_pktdma 0xc102 0>, /* egress slice 0 */
> + <&main_pktdma 0xc103 0>, /* egress slice 0 */
> + <&main_pktdma 0xc104 0>, /* egress slice 1 */
> + <&main_pktdma 0xc105 0>, /* egress slice 1 */
> + <&main_pktdma 0xc106 0>, /* egress slice 1 */
> + <&main_pktdma 0xc107 0>, /* egress slice 1 */
> + <&main_pktdma 0x4100 0>, /* ingress slice 0 */
> + <&main_pktdma 0x4101 0>; /* ingress slice 1 */
Any particular reason to use ASEL = 0 unlike every other definition of
main_pktdma that uses ASEL=15?
> + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> + "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> + "rx0", "rx1";
> +
> + interrupt-parent = <&icssg0_intc>;
> + interrupts = <24 0 2>, <25 1 3>;
> + interrupt-names = "tx_ts0", "tx_ts1";
> +
> + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
> + firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
> + "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
> + "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
> + "ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
> + "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
> + "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
> +
> + ti,pruss-gp-mux-sel = <2>, /* MII mode */
> + <2>,
> + <2>,
> + <2>, /* MII mode */
> + <2>,
> + <2>;
> +
> + ti,mii-g-rt = <&icssg0_mii_g_rt>;
> + ti,mii-rt = <&icssg0_mii_rt>;
> + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
> + ti,pa-stats = <&icssg0_pa_stats>;
> +
--
Regards
Vignesh
https://ti.com/opensource
Hi Vignesh,
On 3/14/2026 6:01 PM, Vignesh Raghavendra wrote:
> Hi
>
> [...]
>
> On 11/03/26 11:08, Meghana Malladi wrote
>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
>> new file mode 100644
>> index 000000000000..f19acf1896c3
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
>> @@ -0,0 +1,168 @@
>> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
>> +/**
>> + * DT overlay for enabling ICSSG0 dual EMAC on AM642 EVM
>> + *
>> + * AM642 EVM Product link: https://www.ti.com/tool/TMDS64EVM
>> + * DP83TG720 daughter card link: https://www.ti.com/tool/DP83TG720-IND-SPE-EVM
>> + *
>> + * Copyright (C) 2020-2026 Texas Instruments Incorporated - https://www.ti.com/
>> + */
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include "k3-pinctrl.h"
>> +
>> +&{/} {
>> + icssg0_eth: icssg0-eth {
>> + compatible = "ti,am642-icssg-prueth";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pru_icssg0_rgmii1_pins_default>, <&pru_icssg0_rgmii2_pins_default>;
>> + sram = <&oc_sram>;
>> +
>> + dmas = <&main_pktdma 0xc100 0>, /* egress slice 0 */
>> + <&main_pktdma 0xc101 0>, /* egress slice 0 */
>> + <&main_pktdma 0xc102 0>, /* egress slice 0 */
>> + <&main_pktdma 0xc103 0>, /* egress slice 0 */
>> + <&main_pktdma 0xc104 0>, /* egress slice 1 */
>> + <&main_pktdma 0xc105 0>, /* egress slice 1 */
>> + <&main_pktdma 0xc106 0>, /* egress slice 1 */
>> + <&main_pktdma 0xc107 0>, /* egress slice 1 */
>> + <&main_pktdma 0x4100 0>, /* ingress slice 0 */
>> + <&main_pktdma 0x4101 0>; /* ingress slice 1 */
>
>
> Any particular reason to use ASEL = 0 unlike every other definition of
> main_pktdma that uses ASEL=15?
This wasn't intentional change. I used claude for making these changes,
so missed this. Thanks for catching it, will fix it in next version.
>
>> + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
>> + "tx1-0", "tx1-1", "tx1-2", "tx1-3",
>> + "rx0", "rx1";
>> +
>> + interrupt-parent = <&icssg0_intc>;
>> + interrupts = <24 0 2>, <25 1 3>;
>> + interrupt-names = "tx_ts0", "tx_ts1";
>> +
>> + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
>> + firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
>> + "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
>> + "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
>> + "ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
>> + "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
>> + "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
>> +
>> + ti,pruss-gp-mux-sel = <2>, /* MII mode */
>> + <2>,
>> + <2>,
>> + <2>, /* MII mode */
>> + <2>,
>> + <2>;
>> +
>> + ti,mii-g-rt = <&icssg0_mii_g_rt>;
>> + ti,mii-rt = <&icssg0_mii_rt>;
>> + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
>> + ti,pa-stats = <&icssg0_pa_stats>;
>> +
>
--
Thanks,
Meghana Malladi
© 2016 - 2026 Red Hat, Inc.