[PATCH v3 08/11] power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states

Alexey Charkov posted 11 patches 4 weeks, 1 day ago
There is a newer version of this series
[PATCH v3 08/11] power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
Posted by Alexey Charkov 4 weeks, 1 day ago
The driver currently reports the 'charging' and 'overvoltage' states based
on a logical expression in the get_charger_property() wrapper function.
This doesn't scale well to other chip variants, which may have a different
number and type of hardware reported conditions which fall into these
broad power supply states.

Move the logic for determining 'charging' and 'overvoltage' states into
chip-specific accessors, which can be overridden by each variant as
needed.

This helps keep the get_charger_property() wrapper function chip-agnostic
while allowing for new chip variants to be added bringing their own logic.

Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
 drivers/power/supply/bq257xx_charger.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq257xx_charger.c b/drivers/power/supply/bq257xx_charger.c
index deb60a9bd222..951abd035fc5 100644
--- a/drivers/power/supply/bq257xx_charger.c
+++ b/drivers/power/supply/bq257xx_charger.c
@@ -64,8 +64,10 @@ struct bq257xx_chg {
 	struct bq257xx_device *bq;
 	struct power_supply *charger;
 	bool online;
+	bool charging;
 	bool fast_charge;
 	bool pre_charge;
+	bool overvoltage;
 	bool ov_fault;
 	bool batoc_fault;
 	bool oc_fault;
@@ -99,8 +101,10 @@ static int bq25703_get_state(struct bq257xx_chg *pdata)
 	pdata->online = reg & BQ25703_STS_AC_STAT;
 	pdata->fast_charge = reg & BQ25703_STS_IN_FCHRG;
 	pdata->pre_charge = reg & BQ25703_STS_IN_PCHRG;
+	pdata->charging = pdata->fast_charge || pdata->pre_charge;
 	pdata->ov_fault = reg & BQ25703_STS_FAULT_ACOV;
 	pdata->batoc_fault = reg & BQ25703_STS_FAULT_BATOC;
+	pdata->overvoltage = pdata->ov_fault || pdata->batoc_fault;
 	pdata->oc_fault = reg & BQ25703_STS_FAULT_ACOC;
 
 	return 0;
@@ -471,14 +475,14 @@ static int bq257xx_get_charger_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_STATUS:
 		if (!pdata->online)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-		else if (pdata->fast_charge || pdata->pre_charge)
+		else if (pdata->charging)
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
-		if (pdata->ov_fault || pdata->batoc_fault)
+		if (pdata->overvoltage)
 			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 		else if (pdata->oc_fault)
 			val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT;

-- 
2.52.0
Re: [PATCH v3 08/11] power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
Posted by Sebastian Reichel 4 weeks, 1 day ago
Hi,

On Tue, Mar 10, 2026 at 01:28:32PM +0400, Alexey Charkov wrote:
> The driver currently reports the 'charging' and 'overvoltage' states based
> on a logical expression in the get_charger_property() wrapper function.
> This doesn't scale well to other chip variants, which may have a different
> number and type of hardware reported conditions which fall into these
> broad power supply states.
> 
> Move the logic for determining 'charging' and 'overvoltage' states into
> chip-specific accessors, which can be overridden by each variant as
> needed.
> 
> This helps keep the get_charger_property() wrapper function chip-agnostic
> while allowing for new chip variants to be added bringing their own logic.
> 
> Tested-by: Chris Morgan <macromorgan@hotmail.com>
> Signed-off-by: Alexey Charkov <alchark@flipper.net>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  drivers/power/supply/bq257xx_charger.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/supply/bq257xx_charger.c b/drivers/power/supply/bq257xx_charger.c
> index deb60a9bd222..951abd035fc5 100644
> --- a/drivers/power/supply/bq257xx_charger.c
> +++ b/drivers/power/supply/bq257xx_charger.c
> @@ -64,8 +64,10 @@ struct bq257xx_chg {
>  	struct bq257xx_device *bq;
>  	struct power_supply *charger;
>  	bool online;
> +	bool charging;
>  	bool fast_charge;
>  	bool pre_charge;
> +	bool overvoltage;
>  	bool ov_fault;
>  	bool batoc_fault;
>  	bool oc_fault;
> @@ -99,8 +101,10 @@ static int bq25703_get_state(struct bq257xx_chg *pdata)
>  	pdata->online = reg & BQ25703_STS_AC_STAT;
>  	pdata->fast_charge = reg & BQ25703_STS_IN_FCHRG;
>  	pdata->pre_charge = reg & BQ25703_STS_IN_PCHRG;
> +	pdata->charging = pdata->fast_charge || pdata->pre_charge;
>  	pdata->ov_fault = reg & BQ25703_STS_FAULT_ACOV;
>  	pdata->batoc_fault = reg & BQ25703_STS_FAULT_BATOC;
> +	pdata->overvoltage = pdata->ov_fault || pdata->batoc_fault;
>  	pdata->oc_fault = reg & BQ25703_STS_FAULT_ACOC;
>  
>  	return 0;
> @@ -471,14 +475,14 @@ static int bq257xx_get_charger_property(struct power_supply *psy,
>  	case POWER_SUPPLY_PROP_STATUS:
>  		if (!pdata->online)
>  			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> -		else if (pdata->fast_charge || pdata->pre_charge)
> +		else if (pdata->charging)
>  			val->intval = POWER_SUPPLY_STATUS_CHARGING;
>  		else
>  			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
>  		break;
>  
>  	case POWER_SUPPLY_PROP_HEALTH:
> -		if (pdata->ov_fault || pdata->batoc_fault)
> +		if (pdata->overvoltage)
>  			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
>  		else if (pdata->oc_fault)
>  			val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT;
> 
> -- 
> 2.52.0
>