Supported functionality as of this initial submission:
* Armor Case & Dock Hall Sensors
* Camera flash/torch LED
* Display (Tianma TA066VVHM03)
* DisplayPort Alt Mode
* Macro Camera (OV8856)
* GPU (Adreno 650)
* NFC (NXP PN553)
* Power Button, Volume Keys
* Regulators
* Remoteprocs (ADSP, CDSP, SLPI)
* UFS
* USB
* Video Codec (Venus)
* Wi-Fi / Bluetooth (QCA6390)
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8250-asus-obiwan.dts | 1298 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 +-
3 files changed, 1306 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f80b5d9cf1e8..cca71c3884f6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -307,6 +307,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-asus-obiwan.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8250-asus-obiwan.dts b/arch/arm64/boot/dts/qcom/sm8250-asus-obiwan.dts
new file mode 100644
index 000000000000..7aabfdafeab2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-asus-obiwan.dts
@@ -0,0 +1,1298 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/clock/qcom,camcc-sm8250.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "sm8250.dtsi"
+#include "pm8150.dtsi" /* PM8250 */
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &camera_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &cvp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &npu_mem;
+/delete-node/ &removed_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_mem;
+
+/ {
+ model = "ASUS ROG Phone 3";
+ compatible = "asus,obiwan", "qcom,sm8250";
+ chassis-type = "handset";
+ qcom,board-id = <50 0>;
+ qcom,msm-id = <QCOM_ID_SM8250 0x20001>;
+
+ aliases {
+ serial0 = &uart12;
+ serial1 = &uart6;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4360000>;
+ charge-full-design-microamp-hours = <5800000>;
+ charge-term-current-microamp = <200000>;
+ constant-charge-current-max-microamp = <2750000>;
+ constant-charge-voltage-max-microvolt = <4360000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_default>, <&hall_sensors_default>;
+ pinctrl-names = "default";
+
+ event-hall-sensor-case {
+ label = "Hall Effect Sensor (Armor Case)";
+ gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ event-hall-sensor-dock {
+ label = "Hall Effect Sensor (Dock)";
+ gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_DOCK>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ qca6390-pmu {
+ compatible = "qcom,qca6390-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>, <&wlan_en_default>;
+
+ vddaon-supply = <&vreg_s6a>;
+ vddpmu-supply = <&vreg_s6a>;
+ vddrfa0p95-supply = <&vreg_s6a>;
+ vddrfa1p3-supply = <&vreg_s8c>;
+ vddrfa1p9-supply = <&vreg_s5a>;
+ vddpcie1p3-supply = <&vreg_s8c>;
+ vddpcie1p9-supply = <&vreg_s5a>;
+ vddio-supply = <&vreg_s4a>;
+
+ wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+
+ vreg_cam_dvdd_1p2: regulator-cam-dvdd-1p2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_cam_dvdd_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <233>;
+ gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vreg_pm8150b_vbus: regulator-pm8150b-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_pm8150b_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&pm8150b_vbus>;
+ };
+
+ vreg_rt1715_vbus: regulator-rt1715-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_rt1715_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vreg_s6c: regulator-smpc6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s6c";
+
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-always-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ reserved-memory {
+ removed_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0xb200000>;
+ no-map;
+ };
+
+ camera_mem: memory@8bf00000 {
+ reg = <0x0 0x8bf00000 0x0 0x500000>;
+ no-map;
+ };
+
+ wlan_mem: memory@8c400000 {
+ reg = <0x0 0x8c400000 0x0 0x100000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c500000 {
+ reg = <0x0 0x8c500000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@8c510000 {
+ reg = <0x0 0x8c510000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c51a000 {
+ reg = <0x0 0x8c51a000 0x0 0x2000>;
+ no-map;
+ };
+
+ npu_mem: memory@8c600000 {
+ reg = <0x0 0x8c600000 0x0 0x500000>;
+ no-map;
+ };
+
+ video_mem: memory@8cb00000 {
+ reg = <0x0 0x8cb00000 0x0 0x500000>;
+ no-map;
+ };
+
+ cvp_mem: memory@8d000000 {
+ reg = <0x0 0x8d000000 0x0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@8d500000 {
+ reg = <0x0 0x8d500000 0x0 0x1400000>;
+ no-map;
+ };
+
+ slpi_mem: memory@8e900000 {
+ reg = <0x0 0x8e900000 0x0 0x1500000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8fe00000 {
+ reg = <0x0 0x8fe00000 0x0 0x1d00000>;
+ no-map;
+ };
+
+ spss_mem: memory@92300000 {
+ reg = <0x0 0x92300000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: memory@92400000 {
+ reg = <0x0 0x92400000 0x0 0x4600000>;
+ no-map;
+ };
+
+ ramoops: ramoops@96a00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x96a00000 0x0 0x400000>;
+ console-size = <0x200000>;
+ pmsg-size = <0x200000>;
+ ecc-size = <16>;
+ };
+
+ asus_debug_mem: memory@97000000 {
+ reg = <0x0 0x97000000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 162 GPIO_ACTIVE_LOW>;
+ select-gpios = <&pm8150l_gpios 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sbu_mux_default>, <&sbu_mux_sel_default>;
+
+ vcc-supply = <&vreg_l2a>;
+ mode-switch;
+ orientation-switch;
+
+ port {
+ sbu_mux_in: endpoint {
+ remote-endpoint = <&pm8150b_sbu>;
+ };
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/sm8250/asus/obiwan/adsp.mbn";
+
+ status = "okay";
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l8-l11-supply = <&vreg_s6c>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a>;
+ vdd-l6-l9-supply = <&vreg_s8c>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a: smps6 {
+ regulator-name = "vreg_s6a";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a: ldo2 {
+ regulator-name = "vreg_l2a";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a: ldo10 {
+ regulator-name = "vreg_l10a";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a: ldo12 {
+ regulator-name = "vreg_l12a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a: ldo13 {
+ regulator-name = "vreg_l13a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a: ldo14 {
+ regulator-name = "vreg_l14a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a: ldo15 {
+ regulator-name = "vreg_l15a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a: ldo16 {
+ regulator-name = "vreg_l16a";
+ regulator-min-microvolt = <3024000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a: ldo17 {
+ regulator-name = "vreg_l17a";
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a: ldo18 {
+ regulator-name = "vreg_l18a";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l8-supply = <&vreg_s4a>;
+ vdd-l2-l3-supply = <&vreg_s8c>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_s7c: smps7 {
+ regulator-name = "vreg_s7c";
+ regulator-min-microvolt = <348000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8c: smps8 {
+ regulator-name = "vreg_s8c";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ /* Hall sensor VDD */
+ regulator-always-on;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c: ldo10 {
+ regulator-name = "vreg_l10c";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c: ldo11 {
+ regulator-name = "vreg_l11c";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&camss {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l9a>;
+
+ status = "okay";
+
+ ports {
+ port@2 {
+ csiphy2_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1>;
+ remote-endpoint = <&ov8856_ep>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ camera@36 {
+ compatible = "ovti,ov8856";
+ reg = <0x36>;
+
+ rotation = <90>;
+ orientation = <1>;
+
+ reset-gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_ov8856_default>;
+
+ clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ clock-names = "xvclk";
+ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ dovdd-supply = <&vreg_l6p>;
+ avdd-supply = <&vreg_l5p>;
+ dvdd-supply = <&vreg_cam_dvdd_1p2>;
+
+ port {
+ ov8856_ep: endpoint {
+ link-frequencies = /bits/ 64 <720000000 360000000>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csiphy2_ep>;
+ };
+ };
+ };
+};
+
+&cdsp {
+ firmware-name = "qcom/sm8250/asus/obiwan/cdsp.mbn";
+
+ status = "okay";
+};
+
+&cpu7_opp_table {
+ cpu7_opp21: opp-3091200000 {
+ opp-hz = /bits/ 64 <3091200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sm8250/asus/obiwan/a650_zap.mbn";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ nfc@28 {
+ compatible = "nxp,pn553",
+ "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_en_default>,
+ <&nfc_clk_req_default>,
+ <&nfc_firmware_default>,
+ <&nfc_irq_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c4 {
+ /* AW8697FCR vibrator @ 0x5a */
+
+ status = "okay";
+};
+
+&i2c13 {
+ /* Goodix GT9896 touchscreen @ 0x5d */
+
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+
+ typec@4e {
+ compatible = "richtek,rt1715";
+ reg = <0x4e>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vreg_rt1715_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rt1715_irq_default>;
+
+ connector {
+ compatible = "usb-c-connector";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ self-powered;
+ op-sink-microwatt = <10000000>;
+
+ source-pdos = <PDO_FIXED(5000, 500,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ sink-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)
+ PDO_FIXED(9000, 2000, 0)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rt1715_con_hs: endpoint {
+ remote-endpoint = <&usb_2_dwc3_hs_out>;
+ };
+ };
+ };
+ };
+ };
+
+ pm8008: pmic@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+
+ interrupts-extended = <&tlmm 39 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ vdd-l1-l2-supply = <&vreg_s8c>;
+ vdd-l3-l4-supply = <&vreg_bob>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_s5a>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8008_default>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ vreg_l1p: ldo1 {
+ regulator-name = "vreg_l1p";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ };
+
+ vreg_l2p: ldo2 {
+ regulator-name = "vreg_l2p";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ };
+
+ vreg_l3p: ldo3 {
+ regulator-name = "vreg_l3p";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <2856000>;
+ };
+
+ vreg_l4p: ldo4 {
+ regulator-name = "vreg_l4p";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vreg_l5p: ldo5 {
+ regulator-name = "vreg_l5p";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vreg_l6p: ldo6 {
+ regulator-name = "vreg_l6p";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l7p: ldo7 {
+ regulator-name = "vreg_l7p";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+};
+
+&i2c16 {
+ /* TFA9874 amplifier (top) @ 0x34 */
+ /* TFA9874 amplifier (bottom) @ 0x35 */
+
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l9a>;
+
+ status = "okay";
+
+ panel@0 {
+ compatible = "tianma,ta066vvhm03";
+ reg = <0>;
+
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ vci-supply = <&vreg_l10a>;
+ vdd-supply = <&vreg_l3c>;
+ vddio-supply = <&vreg_l14a>;
+
+ pinctrl-0 = <&disp_en_active>, <&disp_reset_n_active>, <&mdp_vsync>;
+ pinctrl-1 = <&disp_en_suspend>, <&disp_reset_n_suspend>, <&mdp_vsync>;
+ pinctrl-names = "default", "sleep";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1101";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+
+ qcom,calibration-variant = "ASUS_ROG_Phone_3";
+ };
+};
+
+&pm8150_gpios {
+ volume_up_default: volume-up-default-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <1>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pm8150l_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <2>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
+&pm8150l_gpios {
+ sbu_mux_sel_default: sbu-mux-sel-default-state {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <0>;
+ output-low;
+ };
+};
+
+&pm8150b_gpios {
+ rt1715_mux_en: rt1715-mux-en-default-state {
+ pins = "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <0>;
+ output-high;
+ };
+};
+
+&pm8150b_typec {
+ vdd-pdphy-supply = <&vreg_l2a>;
+ vdd-vbus-supply = <&vreg_pm8150b_vbus>;
+
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "source";
+ self-powered;
+ op-sink-microwatt = <10000000>;
+
+ source-pdos = <PDO_FIXED(5000, 900,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ sink-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)
+ PDO_FIXED(9000, 3000, 0)
+ PDO_FIXED(12000, 2250, 0)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm8150b_hs: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm8150b_ss: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ pm8150b_sbu: endpoint {
+ remote-endpoint = <&sbu_mux_in>;
+ };
+ };
+ };
+ };
+};
+
+&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+
+ status = "okay";
+};
+
+&pon {
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/sm8250/asus/obiwan/slpi.mbn";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <28 4>, /* NXP PN553 eSE (SPI) */
+ <40 4>; /* Goodix GF9608 UDFPS (SPI) */
+
+ nfc_en_default: nfc-en-default-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ nfc_clk_req_default: nfc-clk-req-default-state {
+ pins = "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ disp_en_active: disp-en-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ disp_en_suspend: disp-en-suspend-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wlan_en_default: wlan-default-state {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+
+ bt_en_default: bt-default-state {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+
+ pm8008_default: pm8008-default-state {
+ reset-n-pins {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ irq-pins {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdp_vsync: mdp-vsync-state {
+ pins = "gpio66";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ disp_reset_n_active: disp-reset-n-active-state {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ disp_reset_n_suspend: disp-reset-n-suspend-state {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_ov8856_default: cam-ov8856-default-state {
+ mclk-pins {
+ pins = "gpio96";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio109";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ nfc_firmware_default: nfc-firmware-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ nfc_irq_default: nfc-irq-default-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hall_sensors_default: hall-sensors-default-state {
+ pins = "gpio113", "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sbu_mux_default: sbu-mux-default-state {
+ pins = "gpio162";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rt1715_irq_default: rt1715-irq-default-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&uart12 {
+ /*
+ * Debug UART routed through a mux with an enable line on
+ * GPIO 170. The active state is unknown, so data may not
+ * pass through.
+ */
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,qca6390-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l6a>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a>;
+ vccq2-max-microamp = <750000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm8150b_hs>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l12a>;
+ vdda33-supply = <&vreg_l2a>;
+
+ qcom,hs-disconnect-bp = <973>;
+ qcom,hs-amplitude-bp = <1110>;
+ qcom,pre-emphasis-amplitude-bp = <10000>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l9a>;
+ vdda-pll-supply = <&vreg_l18a>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pm8150b_ss>;
+};
+
+&usb_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rt1715_mux_en>;
+
+ /*
+ * Disable USB3 clock requirement as the bottom port only supports USB2.
+ * The USB3 lanes are routed through the pogo connector on this board for
+ * use with accessories, so will need to revisit this when we start to add
+ * support for those.
+ */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+
+ port {
+ usb_2_dwc3_hs_out: endpoint {
+ remote-endpoint = <&rt1715_con_hs>;
+ };
+ };
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda18-supply = <&vreg_l12a>;
+ vdda33-supply = <&vreg_l2a>;
+
+ qcom,hs-disconnect-bp = <1332>;
+ qcom,hs-amplitude-bp = <2000>;
+ qcom,pre-emphasis-amplitude-bp = <20000>;
+
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sm8250/asus/obiwan/venus.mbn";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c7dffa440074..f95bd4bc0f17 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3928,6 +3928,7 @@ usb_1_qmpphy: phy@88e8000 {
#phy-cells = <1>;
orientation-switch;
+ mode-switch;
ports {
#address-cells = <1>;
@@ -3949,7 +3950,9 @@ usb_1_qmpphy_usb_ss_in: endpoint {
port@2 {
reg = <2>;
- usb_1_qmpphy_dp_in: endpoint {};
+ usb_1_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
+ };
};
};
};
@@ -4223,6 +4226,7 @@ usb_1_dwc3: usb@a600000 {
snps,dis-u2-entry-quirk;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+ usb-role-switch;
ports {
#address-cells = <1>;
@@ -4312,6 +4316,7 @@ usb_2_dwc3: usb@a800000 {
snps,dis-u2-entry-quirk;
phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
+ usb-role-switch;
};
};
@@ -4819,6 +4824,7 @@ port@1 {
reg = <1>;
mdss_dp_out: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
};
};
};
--
2.53.0© 2016 - 2026 Red Hat, Inc.