From: Dennis Gilmore <dennis@ausil.us>
Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
- eMMC module, you can optionally solder a SPI NOR in place and turn
off the eMMC
- PCIe-attached NIC (pcie2x1l1)
- PCIe NVMe slot (pcie2x1l2)
- AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
- BCM4345C5 Bluetooth
- es8388 audio
- USB 2.0 and USB 3.0
Vendors description and links to schematics available:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3588s-orangepi-5-pro.dts | 311 ++++++++++++++++++
2 files changed, 312 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4d384f153c13..c99dca2ae9e7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
new file mode 100644
index 000000000000..d848891e09be
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5 Pro";
+ compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s2_2ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm15 0 1000000 0>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_ACTIVITY;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm3 0 1000000 0>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 50 100 150 200 255>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm2 0 20000000 0>;
+ };
+
+ vcc3v3_pcie_m2: regulator-vcc3v3-pcie-m2 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pcie_m2";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pcie20";
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_otg: regulator-vcc5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_otg_en>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_otg";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m4_xfer>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x11>;
+ #sound-dai-cells = <0>;
+ AVDD-supply = <&vcc_3v3_s0>;
+ DVDD-supply = <&vcc_1v8_s0>;
+ HPVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_3v3_s0>;
+ assigned-clock-rates = <12288000>;
+ assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
+ clocks = <&cru I2S2_2CH_MCLKOUT>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m3_xfer>;
+ status = "okay";
+};
+
+&i2s2_2ch {
+ pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk
+ &i2s2m1_sdi &i2s2m1_sdo>;
+ status = "okay";
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ cooling-maps {
+ map0 {
+ trip = <&package_fan0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map1 {
+ trip = <&package_fan1>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ package_fan0: package-fan0 {
+ hysteresis = <2000>;
+ temperature = <55000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ hysteresis = <2000>;
+ temperature = <65000>;
+ type = "active";
+ };
+ };
+};
+
+/* NVMe */
+&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ supports-clkreq;
+ vpcie3v3-supply = <&vcc3v3_pcie_m2>;
+ status = "okay";
+};
+
+/* NIC */
+&pcie2x1l2 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie20>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth {
+ bt_wake_gpio: bt-wake-pin {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ usb {
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wlan {
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm15 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm15m2_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m1_pins>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3m2_pins>;
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ ap6256: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-names = "host-wake";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ };
+};
+
+&u2phy0_otg {
+ phy-supply = <&vcc5v0_otg>;
+};
+
+&uart9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wakeup";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
+ shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+};
+
+&usbdp_phy0 {
+ rockchip,dp-lane-mux = <0 1>;
+};
--
2.53.0On Thu, Mar 5, 2026 at 8:46 PM <dennis@ausil.us> wrote:
>
> From: Dennis Gilmore <dennis@ausil.us>
>
> Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
>
> - eMMC module, you can optionally solder a SPI NOR in place and turn
> off the eMMC
> - PCIe-attached NIC (pcie2x1l1)
> - PCIe NVMe slot (pcie2x1l2)
> - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> - BCM4345C5 Bluetooth
> - es8388 audio
> - USB 2.0 and USB 3.0
>
> Vendors description and links to schematics available:
> http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 311 ++++++++++++++++++
> 2 files changed, 312 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4d384f153c13..c99dca2ae9e7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> new file mode 100644
> index 000000000000..d848891e09be
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> @@ -0,0 +1,311 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> + model = "Xunlong Orange Pi 5 Pro";
> + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> +
> + aliases {
> + mmc0 = &sdhci;
> + mmc1 = &sdmmc;
> + mmc2 = &sdio;
> + };
> +
> + analog-sound {
> + compatible = "simple-audio-card";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_detect>;
> + simple-audio-card,bitclock-master = <&masterdai>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&masterdai>;
> + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> + simple-audio-card,mclk-fs = <256>;
> + simple-audio-card,name = "rockchip,es8388";
> + simple-audio-card,routing =
> + "Headphones", "LOUT1",
> + "Headphones", "ROUT1",
> + "LINPUT1", "Microphone Jack",
> + "RINPUT1", "Microphone Jack",
> + "LINPUT2", "Onboard Microphone",
> + "RINPUT2", "Onboard Microphone";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Microphone", "Onboard Microphone",
> + "Headphone", "Headphones";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s2_2ch>;
> + };
> +
> + masterdai: simple-audio-card,codec {
> + sound-dai = <&es8388>;
> + system-clock-frequency = <12288000>;
> + };
> + };
> +
> + pwm-leds {
> + compatible = "pwm-leds";
> +
> + led-0 {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_STATUS;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm15 0 1000000 0>;
> + };
> +
> + led-1 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_ACTIVITY;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm3 0 1000000 0>;
> + };
> + };
> +
> + fan: pwm-fan {
> + compatible = "pwm-fan";
> + #cooling-cells = <2>;
> + cooling-levels = <0 50 100 150 200 255>;
> + fan-supply = <&vcc5v0_sys>;
> + pwms = <&pwm2 0 20000000 0>;
> + };
> +
> + vcc3v3_pcie_m2: regulator-vcc3v3-pcie-m2 {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_pcie_m2";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_pcie20";
Is this vcc3v3_phy1 in the schematic?
> + startup-delay-us = <50000>;
> + vin-supply = <&vcc5v0_sys>;
according to the schematic, this is fed by vcc_3v3_s3
> + };
> +
> + vcc5v0_otg: regulator-vcc5v0-otg {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_otg_en>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <5000000>;
> + regulator-name = "vcc5v0_otg";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&hym8563>;
> + clock-names = "ext_clock";
> + post-power-on-delay-ms = <200>;
> + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1m4_xfer>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3m0_xfer>;
> + status = "okay";
> +
> + es8388: audio-codec@11 {
> + compatible = "everest,es8388", "everest,es8328";
> + reg = <0x11>;
> + #sound-dai-cells = <0>;
> + AVDD-supply = <&vcc_3v3_s0>;
> + DVDD-supply = <&vcc_1v8_s0>;
> + HPVDD-supply = <&vcc_3v3_s0>;
> + PVDD-supply = <&vcc_3v3_s0>;
> + assigned-clock-rates = <12288000>;
> + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> + clocks = <&cru I2S2_2CH_MCLKOUT>;
> + };
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4m3_xfer>;
> + status = "okay";
> +};
> +
> +&i2s2_2ch {
> + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk
> + &i2s2m1_sdi &i2s2m1_sdo>;
> + status = "okay";
> +};
> +
> +&package_thermal {
> + polling-delay = <1000>;
> +
> + cooling-maps {
> + map0 {
> + trip = <&package_fan0>;
> + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> + };
> +
> + map1 {
> + trip = <&package_fan1>;
> + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> + };
> + };
> +
> + trips {
> + package_fan0: package-fan0 {
> + hysteresis = <2000>;
> + temperature = <55000>;
> + type = "active";
> + };
> +
> + package_fan1: package-fan1 {
> + hysteresis = <2000>;
> + temperature = <65000>;
> + type = "active";
> + };
> + };
> +};
> +
> +/* NVMe */
> +&pcie2x1l1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> + supports-clkreq;
> + vpcie3v3-supply = <&vcc3v3_pcie_m2>;
Is this real? In the schematic, the supply looks like vcc_3v3_s3.
> + status = "okay";
> +};
> +
> +/* NIC */
> +&pcie2x1l2 {
> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_pcie20>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + bluetooth {
> + bt_wake_gpio: bt-wake-pin {
> + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_host_irq: bt-wake-host-irq {
> + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + usb {
> + vcc5v0_otg_en: vcc5v0-otg-en {
> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wlan {
> + wifi_host_wake_irq: wifi-host-wake-irq {
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +};
> +
> +&pwm15 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm15m2_pins>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm2m1_pins>;
> + status = "okay";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm3m2_pins>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + status = "okay";
> +};
> +
> +&sdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + max-frequency = <150000000>;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + no-mmc;
> + no-sd;
> + non-removable;
> + sd-uhs-sdr104;
> + status = "okay";
> +
> + ap6256: wifi@1 {
> + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
> + reg = <1>;
> + interrupt-names = "host-wake";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_host_wake_irq>;
> + };
> +};
> +
> +&u2phy0_otg {
> + phy-supply = <&vcc5v0_otg>;
> +};
> +
> +&uart9 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm4345c5";
> + clocks = <&hym8563>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> + interrupt-names = "host-wakeup";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
> + max-speed = <1500000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
> + shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> + vbat-supply = <&vcc_3v3_s3>;
> + vddio-supply = <&vcc_1v8_s3>;
> + };
> +};
> +
> +&usb_host0_xhci {
> + dr_mode = "host";
> +};
> +
> +&usbdp_phy0 {
> + rockchip,dp-lane-mux = <0 1>;
> +};
> --
> 2.53.0
>
On Thu, Mar 5, 2026 at 9:29 PM Jimmy Hon <honyuenkwun@gmail.com> wrote:
>
> On Thu, Mar 5, 2026 at 8:46 PM <dennis@ausil.us> wrote:
> >
> > From: Dennis Gilmore <dennis@ausil.us>
> >
> > Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
> >
> > - eMMC module, you can optionally solder a SPI NOR in place and turn
> > off the eMMC
> > - PCIe-attached NIC (pcie2x1l1)
> > - PCIe NVMe slot (pcie2x1l2)
> > - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> > - BCM4345C5 Bluetooth
> > - es8388 audio
> > - USB 2.0 and USB 3.0
> >
> > Vendors description and links to schematics available:
> > http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
> >
> > Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> > ---
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 311 ++++++++++++++++++
> > 2 files changed, 312 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 4d384f153c13..c99dca2ae9e7 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > new file mode 100644
> > index 000000000000..d848891e09be
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > @@ -0,0 +1,311 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +
> > +/dts-v1/;
> > +
> > +#include "rk3588s-orangepi-5.dtsi"
> > +
> > +/ {
> > + model = "Xunlong Orange Pi 5 Pro";
> > + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> > +
> > + aliases {
> > + mmc0 = &sdhci;
> > + mmc1 = &sdmmc;
> > + mmc2 = &sdio;
> > + };
> > +
> > + analog-sound {
> > + compatible = "simple-audio-card";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hp_detect>;
> > + simple-audio-card,bitclock-master = <&masterdai>;
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,frame-master = <&masterdai>;
> > + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> > + simple-audio-card,mclk-fs = <256>;
> > + simple-audio-card,name = "rockchip,es8388";
> > + simple-audio-card,routing =
> > + "Headphones", "LOUT1",
> > + "Headphones", "ROUT1",
> > + "LINPUT1", "Microphone Jack",
> > + "RINPUT1", "Microphone Jack",
> > + "LINPUT2", "Onboard Microphone",
> > + "RINPUT2", "Onboard Microphone";
> > + simple-audio-card,widgets =
> > + "Microphone", "Microphone Jack",
> > + "Microphone", "Onboard Microphone",
> > + "Headphone", "Headphones";
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&i2s2_2ch>;
> > + };
> > +
> > + masterdai: simple-audio-card,codec {
> > + sound-dai = <&es8388>;
> > + system-clock-frequency = <12288000>;
> > + };
> > + };
> > +
> > + pwm-leds {
> > + compatible = "pwm-leds";
> > +
> > + led-0 {
> > + color = <LED_COLOR_ID_BLUE>;
> > + function = LED_FUNCTION_STATUS;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm15 0 1000000 0>;
> > + };
> > +
> > + led-1 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_ACTIVITY;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm3 0 1000000 0>;
> > + };
> > + };
> > +
> > + fan: pwm-fan {
> > + compatible = "pwm-fan";
> > + #cooling-cells = <2>;
> > + cooling-levels = <0 50 100 150 200 255>;
> > + fan-supply = <&vcc5v0_sys>;
> > + pwms = <&pwm2 0 20000000 0>;
> > + };
> > +
> > + vcc3v3_pcie_m2: regulator-vcc3v3-pcie-m2 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_pcie_m2";
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_pcie20";
> Is this vcc3v3_phy1 in the schematic?
>
> > + startup-delay-us = <50000>;
> > + vin-supply = <&vcc5v0_sys>;
> according to the schematic, this is fed by vcc_3v3_s3
Thanks for the review, Jimmy.
You're right on the vin-supply point — this should be vcc_3v3_s3, not
vcc5v0_sys. I'll fix it
Regarding "Is this vcc3v3_phy1?", that is the source. vcc3v3_pcie20
came from copying from rk3588s-orangepi-5.dts I will rename it to
match the label in the schematic
> > + };
> > +
> > + vcc5v0_otg: regulator-vcc5v0-otg {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vcc5v0_otg_en>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-name = "vcc5v0_otg";
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + sdio_pwrseq: sdio-pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + clocks = <&hym8563>;
> > + clock-names = "ext_clock";
> > + post-power-on-delay-ms = <200>;
> > + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1m4_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3m0_xfer>;
> > + status = "okay";
> > +
> > + es8388: audio-codec@11 {
> > + compatible = "everest,es8388", "everest,es8328";
> > + reg = <0x11>;
> > + #sound-dai-cells = <0>;
> > + AVDD-supply = <&vcc_3v3_s0>;
> > + DVDD-supply = <&vcc_1v8_s0>;
> > + HPVDD-supply = <&vcc_3v3_s0>;
> > + PVDD-supply = <&vcc_3v3_s0>;
> > + assigned-clock-rates = <12288000>;
> > + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c4m3_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2s2_2ch {
> > + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk
> > + &i2s2m1_sdi &i2s2m1_sdo>;
> > + status = "okay";
> > +};
> > +
> > +&package_thermal {
> > + polling-delay = <1000>;
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&package_fan0>;
> > + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> > + };
> > +
> > + map1 {
> > + trip = <&package_fan1>;
> > + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> > + };
> > + };
> > +
> > + trips {
> > + package_fan0: package-fan0 {
> > + hysteresis = <2000>;
> > + temperature = <55000>;
> > + type = "active";
> > + };
> > +
> > + package_fan1: package-fan1 {
> > + hysteresis = <2000>;
> > + temperature = <65000>;
> > + type = "active";
> > + };
> > + };
> > +};
> > +
> > +/* NVMe */
> > +&pcie2x1l1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
> > + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> > + supports-clkreq;
> > + vpcie3v3-supply = <&vcc3v3_pcie_m2>;
> Is this real? In the schematic, the supply looks like vcc_3v3_s3.
It is not real, since there's no discrete regulator (VCC_3V3_S3 feeds
the M.2 slot directly), I'll drop that node and have pcie2x1l1
reference vcc_3v3_s3 directly.
Dennis
> > + status = "okay";
> > +};
> > +
> > +/* NIC */
> > +&pcie2x1l2 {
> > + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> > + vpcie3v3-supply = <&vcc3v3_pcie20>;
> > + status = "okay";
> > +};
> > +
> > +&pinctrl {
> > + bluetooth {
> > + bt_wake_gpio: bt-wake-pin {
> > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + bt_wake_host_irq: bt-wake-host-irq {
> > + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +
> > + usb {
> > + vcc5v0_otg_en: vcc5v0-otg-en {
> > + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + wlan {
> > + wifi_host_wake_irq: wifi-host-wake-irq {
> > + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +};
> > +
> > +&pwm15 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm15m2_pins>;
> > + status = "okay";
> > +};
> > +
> > +&pwm2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm2m1_pins>;
> > + status = "okay";
> > +};
> > +
> > +&pwm3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm3m2_pins>;
> > + status = "okay";
> > +};
> > +
> > +&sdhci {
> > + status = "okay";
> > +};
> > +
> > +&sdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + bus-width = <4>;
> > + cap-sd-highspeed;
> > + cap-sdio-irq;
> > + keep-power-in-suspend;
> > + max-frequency = <150000000>;
> > + mmc-pwrseq = <&sdio_pwrseq>;
> > + no-mmc;
> > + no-sd;
> > + non-removable;
> > + sd-uhs-sdr104;
> > + status = "okay";
> > +
> > + ap6256: wifi@1 {
> > + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
> > + reg = <1>;
> > + interrupt-names = "host-wake";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_host_wake_irq>;
> > + };
> > +};
> > +
> > +&u2phy0_otg {
> > + phy-supply = <&vcc5v0_otg>;
> > +};
> > +
> > +&uart9 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
> > + uart-has-rtscts;
> > + status = "okay";
> > +
> > + bluetooth {
> > + compatible = "brcm,bcm4345c5";
> > + clocks = <&hym8563>;
> > + clock-names = "lpo";
> > + device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> > + interrupt-names = "host-wakeup";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
> > + max-speed = <1500000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
> > + shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> > + vbat-supply = <&vcc_3v3_s3>;
> > + vddio-supply = <&vcc_1v8_s3>;
> > + };
> > +};
> > +
> > +&usb_host0_xhci {
> > + dr_mode = "host";
> > +};
> > +
> > +&usbdp_phy0 {
> > + rockchip,dp-lane-mux = <0 1>;
> > +};
> > --
> > 2.53.0
> >
© 2016 - 2026 Red Hat, Inc.