This MIPI-DSI LCD panel must be connected to something, thus add missing
port property, already used in DTS.  Reported by dtbs_check:

  qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/display/panel/samsung,s6d7aa0.yaml        | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
index 939da65114bf..1f753b706911 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -44,6 +44,8 @@ properties:
   vmipi-supply:
     description: VMIPI supply, usually 1.8v.
 
+  port: true
+
 required:
   - compatible
   - reg
@@ -65,6 +67,12 @@ examples:
             power-supply = <&display_3v3_supply>;
             reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
             backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
         };
     };
 

-- 
2.51.0

On 3/6/26 13:02, Krzysztof Kozlowski wrote:
> This MIPI-DSI LCD panel must be connected to something, thus add missing
> port property, already used in DTS.  Reported by dtbs_check:
> 
>    qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
>   .../devicetree/bindings/display/panel/samsung,s6d7aa0.yaml        | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> index 939da65114bf..1f753b706911 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> @@ -44,6 +44,8 @@ properties:
>     vmipi-supply:
>       description: VMIPI supply, usually 1.8v.
>   
> +  port: true
> +
>   required:
>     - compatible
>     - reg
> @@ -65,6 +67,12 @@ examples:
>               power-supply = <&display_3v3_supply>;
>               reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
>               backlight = <&backlight>;
> +
> +            port {
> +                panel_in: endpoint {
> +                    remote-endpoint = <&mdss_dsi0_out>;
> +                };
> +            };
>           };
>       };
>   
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil