On Thu, Mar 05, 2026 at 10:40:44PM +0800, Icenowy Zheng wrote:
> The manual of TH1520 contains a set of coefficients a little different
> to the driver default ones.
>
> Add them to the device tree node of PVT.
>
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
> ---
> No changes in v2.
>
> arch/riscv/boot/dts/thead/th1520.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index bd5d33840884e..2160c8b6c2261 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -753,6 +753,10 @@ pvt: pvt@fffff4e000 {
> reg-names = "common", "ts", "pd", "vm";
> clocks = <&aonsys_clk>;
> #thermal-sensor-cells = <1>;
> + moortec,ts-coeff-g = <42740>;
> + moortec,ts-coeff-h = <220500>;
> + moortec,ts-coeff-j = <(-160)>;
> + moortec,ts-coeff-cal5 = <4094>;
> };
>
> gpio@fffff52000 {
> --
> 2.52.0
>
Thanks for the patch. This matches the information in "Section 15.3.4
Temperature Sensor" on page 866 in the TH1520 System User Manul.
Reviewed-by: Drew Fustini <fustini@kernel.org>