From: Gal Pressman <gal@nvidia.com>

In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.

After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.

The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.

Remove the 'dma_fifo_cc = 0' reset.

This fixes the following WARNING:
    WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
    Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
    CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
    RIP: 0010:iommu_dma_unmap_page+0x79/0x90
    Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
    Call Trace:
     <IRQ>
     ? __warn+0x7d/0x110
     ? iommu_dma_unmap_page+0x79/0x90
     ? report_bug+0x16d/0x180
     ? handle_bug+0x4f/0x90
     ? exc_invalid_op+0x14/0x70
     ? asm_exc_invalid_op+0x16/0x20
     ? iommu_dma_unmap_page+0x79/0x90
     ? iommu_dma_unmap_page+0x2e/0x90
     dma_unmap_page_attrs+0x10d/0x1b0
     mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
     mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
     mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
     __napi_poll+0x24/0x190
     net_rx_action+0x32a/0x3b0
     ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
     ? notifier_call_chain+0x35/0xa0
     handle_softirqs+0xc9/0x270
     irq_exit_rcu+0x71/0xd0
     common_interrupt+0x7f/0xa0
     </IRQ>
     <TASK>
     asm_common_interrupt+0x22/0x40

Fixes: db75373c91b0 ("net/mlx5e: Recover Send Queue (SQ) from error state")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
index 60ba840e00fa..afdeb1b3d425 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
@@ -47,7 +47,6 @@ static void mlx5e_reset_txqsq_cc_pc(struct mlx5e_txqsq *sq)
 		  "SQ 0x%x: cc (0x%x) != pc (0x%x)\n",
 		  sq->sqn, sq->cc, sq->pc);
 	sq->cc = 0;
-	sq->dma_fifo_cc = 0;
 	sq->pc = 0;
 }
 
-- 
2.44.0