The DTSI already has address/size-cells for each I2C controller, thus
the board does not have to define them again.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi | 2 --
 arch/arm/boot/dts/samsung/exynos3250-monk.dts    | 4 ----
 arch/arm/boot/dts/samsung/exynos3250-rinato.dts  | 4 ----
 3 files changed, 10 deletions(-)

diff --git a/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi
index 3fdd922e635c..059c0f44e164 100644
--- a/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi
@@ -74,8 +74,6 @@ &gpu {
 };
 
 &i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <100000>;
diff --git a/arch/arm/boot/dts/samsung/exynos3250-monk.dts b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
index 68236c7297d7..d59ed46614bd 100644
--- a/arch/arm/boot/dts/samsung/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
@@ -191,8 +191,6 @@ &hsotg {
 };
 
 &i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <100000>;
@@ -414,8 +412,6 @@ buck5_reg: BUCK5 {
 };
 
 &i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <400000>;
diff --git a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
index 36d2171c1ce8..fa983b732898 100644
--- a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
@@ -263,8 +263,6 @@ &gpu {
 };
 
 &i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <100000>;
@@ -594,8 +592,6 @@ regulator-state-mem {
 };
 
 &i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <400000>;

-- 
2.51.0