From: Kryštof Černý <cleverline1mc@gmail.com>
Realtek RTL8211F-VD has the same LED configuration
and registers as RTL8211F.
Use the existing LED related functions for this chip,
so it is possible to also use the netdev trigger.
Tested on ROCK Pi E.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Thanks Andrew Lunn for his feedback.
---
Changes in v2:
- Sending in the right time and fixing subject line.
- No code changes.
- Link to v1: https://lore.kernel.org/r/20260216-rtl8211fvd-add-leds-v1-1-a2b8617bbf80@gmail.com
---
drivers/net/phy/realtek/realtek_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 75565fbdbf6d..530b4e26d16e 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -2243,6 +2243,9 @@ static struct phy_driver realtek_drvs[] = {
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.flags = PHY_ALWAYS_CALL_SUSPEND,
+ .led_hw_is_supported = rtl8211x_led_hw_is_supported,
+ .led_hw_control_get = rtl8211f_led_hw_control_get,
+ .led_hw_control_set = rtl8211f_led_hw_control_set,
}, {
.name = "Generic FE-GE Realtek PHY",
.match_phy_device = rtlgen_match_phy_device,
---
base-commit: 350adaf7fde9fdbd9aeed6d442a9ae90c6a3ab97
change-id: 20260216-rtl8211fvd-add-leds-72e5d666e921
Best regards,
--
Kryštof Černý <cleverline1mc@gmail.com>