Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b9657ff91c23..93d52fbd0de2 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1129,7 +1129,7 @@ usart1: serial@4c000000 {
resets = <&rcc USART1_R>;
wakeup-source;
dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
+ <&dmamux1 42 0x400 0x1>;
dma-names = "rx", "tx";
access-controllers = <&etzpc 16>;
status = "disabled";
@@ -1143,7 +1143,7 @@ usart2: serial@4c001000 {
resets = <&rcc USART2_R>;
wakeup-source;
dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
+ <&dmamux1 44 0x400 0x1>;
dma-names = "rx", "tx";
access-controllers = <&etzpc 17>;
status = "disabled";
@@ -1155,7 +1155,7 @@ i2s4: audio-controller@4c002000 {
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
+ <&dmamux1 84 0x400 0x01>;
dma-names = "rx", "tx";
access-controllers = <&etzpc 13>;
status = "disabled";
@@ -1348,9 +1348,9 @@ timers15: timer@4c00a000 {
clocks = <&rcc TIM15_K>;
clock-names = "int";
dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
dma-names = "ch1", "up", "trig", "com";
access-controllers = <&etzpc 26>;
status = "disabled";
@@ -1383,7 +1383,7 @@ timers16: timer@4c00b000 {
clocks = <&rcc TIM16_K>;
clock-names = "int";
dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
+ <&dmamux1 110 0x400 0x1>;
dma-names = "ch1", "up";
access-controllers = <&etzpc 27>;
status = "disabled";
--
2.43.0