Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well
This can be included in the board files like twl6030
Example:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};
/include/ "twl6032.dtsi"
...
Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi
diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..d599a2ca6
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+ compatible = "ti,twl6032";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ vio: regulator-vio {
+ compatible = "ti,twl6032-vio";
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,twl6032-ldo1";
+ };
+
+ ldo2: regulator-ldo2 {
+ compatible = "ti,twl6032-ldo2";
+ };
+
+ ldo3: regulator-ldo3 {
+ compatible = "ti,twl6032-ldo3";
+ };
+
+ ldo4: regulator-ldo4 {
+ compatible = "ti,twl6032-ldo4";
+ };
+
+ ldo5: regulator-ldo5 {
+ compatible = "ti,twl6032-ldo5";
+ };
+
+ ldo6: regulator-ldo6 {
+ compatible = "ti,twl6032-ldo6";
+ };
+
+ ldoln: regulator-ldoln {
+ compatible = "ti,twl6032-ldoln";
+ };
+
+ ldousb: regulator-ldousb {
+ compatible = "ti,twl6032-ldousb";
+ };
+
+ smps4: regulator-smps4 {
+ compatible = "ti,twl6032-smps4";
+ };
+
+ gpadc: gpadc {
+ compatible = "ti,twl6032-gpadc";
+ interrupts = <3>;
+ #io-channel-cells = <1>;
+ };
+
+ twl_usb_comparator: usb-comparator {
+ compatible = "ti,twl6030-usb";
+ interrupts = <4>, <10>;
+ };
+
+ twl_pwm: pwm {
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+ };
+};
--
2.43.0