The OV13B10 sensor obtains clock and regulators from the TPS68470 PMIC.
Add TPS68470 regulator and GPIO names to the sensor power on

Signed-off-by: Arun T <arun.t@intel.com>
---
 drivers/media/i2c/ov13b10.c | 48 +++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
index 5421874732bc..d678d0d49266 100644
--- a/drivers/media/i2c/ov13b10.c
+++ b/drivers/media/i2c/ov13b10.c
@@ -3,6 +3,7 @@
 
 #include <linux/acpi.h>
 #include <linux/clk.h>
+#include <linux/regulator/consumer.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -699,6 +700,13 @@ static const struct ov13b10_mode supported_2_lanes_modes[] = {
 	},
 };
 
+static const char * const ov13b10_supply_names[] = {
+	"dovdd",        /* Digital I/O power */
+	"avdd",         /* Analog power */
+	"dvdd",         /* Digital core power */
+	"vdd",		/* Vcm power */
+};
+
 struct ov13b10 {
 	struct device *dev;
 
@@ -708,7 +716,7 @@ struct ov13b10 {
 	struct v4l2_ctrl_handler ctrl_handler;
 
 	struct clk *img_clk;
-	struct regulator *avdd;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(ov13b10_supply_names)];
 	struct gpio_desc *reset;
 
 	/* V4L2 Controls */
@@ -1194,9 +1202,8 @@ static int ov13b10_power_off(struct device *dev)
 	struct ov13b10 *ov13b10 = to_ov13b10(sd);
 
 	gpiod_set_value_cansleep(ov13b10->reset, 1);
-
-	if (ov13b10->avdd)
-		regulator_disable(ov13b10->avdd);
+	regulator_bulk_disable(ARRAY_SIZE(ov13b10_supply_names),
+			       ov13b10->supplies);
 
 	clk_disable_unprepare(ov13b10->img_clk);
 
@@ -1214,14 +1221,12 @@ static int ov13b10_power_on(struct device *dev)
 		dev_err(dev, "failed to enable imaging clock: %d", ret);
 		return ret;
 	}
-
-	if (ov13b10->avdd) {
-		ret = regulator_enable(ov13b10->avdd);
-		if (ret < 0) {
-			dev_err(dev, "failed to enable avdd: %d", ret);
-			clk_disable_unprepare(ov13b10->img_clk);
-			return ret;
-		}
+	ret = regulator_bulk_enable(ARRAY_SIZE(ov13b10_supply_names),
+				    ov13b10->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable regulators\n");
+		clk_disable_unprepare(ov13b10->img_clk);
+		return ret;
 	}
 
 	gpiod_set_value_cansleep(ov13b10->reset, 0);
@@ -1475,7 +1480,8 @@ static int ov13b10_get_pm_resources(struct ov13b10 *ov13b)
 	unsigned long freq;
 	int ret;
 
-	ov13b->reset = devm_gpiod_get_optional(ov13b->dev, "reset", GPIOD_OUT_LOW);
+	ov13b->reset = devm_gpiod_get_optional(ov13b->dev, "reset",
+					       GPIOD_OUT_LOW);
 	if (IS_ERR(ov13b->reset))
 		return dev_err_probe(ov13b->dev, PTR_ERR(ov13b->reset),
 				     "failed to get reset gpio\n");
@@ -1491,15 +1497,15 @@ static int ov13b10_get_pm_resources(struct ov13b10 *ov13b)
 				     "external clock %lu is not supported\n",
 				     freq);
 
-	ov13b->avdd = devm_regulator_get_optional(ov13b->dev, "avdd");
-	if (IS_ERR(ov13b->avdd)) {
-		ret = PTR_ERR(ov13b->avdd);
-		ov13b->avdd = NULL;
-		if (ret != -ENODEV)
-			return dev_err_probe(ov13b->dev, ret,
-					     "failed to get avdd regulator\n");
-	}
+	for (unsigned int i = 0; i < ARRAY_SIZE(ov13b10_supply_names); i++)
+		ov13b->supplies[i].supply = ov13b10_supply_names[i];
 
+	ret = devm_regulator_bulk_get(ov13b->dev,
+				      ARRAY_SIZE(ov13b10_supply_names),
+				      ov13b->supplies);
+	if (ret)
+		return dev_err_probe(ov13b->dev, ret,
+				     "failed to get regulators\n");
 	return 0;
 }
 
-- 
2.43.0