I was informed two weeks ago that this product is discontinued
(without being ever released to the market). Unfortunately, this
collided with the merge window and I had to wait two more weeks.

Pull the plug and let's not waste any more maintainers time.

On the bright side, the board upstreaming brought some driver fixes,
too. I'm really sorry for any wasted time.

v2:
 - drop hwmon patch, that was already picked up by Guenter Roeck
 - reword commit message and don't use the default "git revert"
   template as suggested by Krzysztof Kozlowski.

Michael Walle (7):
  arm64: dts: ti: remove the Kontron SMARC-sAM67
  arm64: defconfig: remove SENSORS_SA67MCU
  dt-bindings: mfd: sl28cpld: Drop sa67mcu compatible
  dt-bindings: arm: ti: Drop Kontron SMARC-sAM67 module
  dt-bindings: nvmem: sl28cpld: Drop sa67mcu compatible
  dt-bindings: watchdog: Drop SMARC-sAM67 support
  dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatible

 .../devicetree/bindings/arm/ti/k3.yaml        |    1 -
 .../embedded-controller/kontron,sl28cpld.yaml |    7 +-
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |    1 -
 .../nvmem/layouts/kontron,sl28-vpd.yaml       |    7 +-
 .../watchdog/kontron,sl28cpld-wdt.yaml        |    7 +-
 arch/arm64/boot/dts/ti/Makefile               |   13 -
 .../dts/ti/k3-am67a-kontron-sa67-ads2.dtso    |  146 ---
 .../dts/ti/k3-am67a-kontron-sa67-base.dts     | 1091 -----------------
 .../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso    |   26 -
 .../dts/ti/k3-am67a-kontron-sa67-gpios.dtso   |   61 -
 .../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso  |   31 -
 arch/arm64/configs/defconfig                  |    1 -
 12 files changed, 3 insertions(+), 1389 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso

-- 
2.47.3

On Mon, 02 Mar 2026 13:24:45 +0100, Michael Walle wrote:
> I was informed two weeks ago that this product is discontinued
> (without being ever released to the market). Unfortunately, this
> collided with the merge window and I had to wait two more weeks.
> 
> Pull the plug and let's not waste any more maintainers time.
> 
> On the bright side, the board upstreaming brought some driver fixes,
> too. I'm really sorry for any wasted time.
> 
> [...]

Applied, thanks!

[5/7] dt-bindings: nvmem: sl28cpld: Drop sa67mcu compatible
      commit: b7ad72258857a3afa0e116b26d0d3ff6ef42ba94

Best regards,
-- 
Srinivas Kandagatla <srini@kernel.org>

Hi Michael Walle,

On Mon, 02 Mar 2026 13:24:45 +0100, Michael Walle wrote:
> I was informed two weeks ago that this product is discontinued
> (without being ever released to the market). Unfortunately, this
> collided with the merge window and I had to wait two more weeks.
> 
> Pull the plug and let's not waste any more maintainers time.
> 
> On the bright side, the board upstreaming brought some driver fixes,
> too. I'm really sorry for any wasted time.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/7] arm64: dts: ti: remove the Kontron SMARC-sAM67
      commit: 852d2c0cc231806b9a3e9cd9e965c08342a27d66
[3/7] dt-bindings: mfd: sl28cpld: Drop sa67mcu compatible
      commit: 8b0260457b0bced7e782f000c1d4c10668bf7cb2
[4/7] dt-bindings: arm: ti: Drop Kontron SMARC-sAM67 module
      commit: 41a7b57152ffbf3ab8ab1110f831b1f53c2f9b88

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh

Hi Michael Walle,

On Mon, 02 Mar 2026 13:24:45 +0100, Michael Walle wrote:
> I was informed two weeks ago that this product is discontinued
> (without being ever released to the market). Unfortunately, this
> collided with the merge window and I had to wait two more weeks.
> 
> Pull the plug and let's not waste any more maintainers time.
> 
> On the bright side, the board upstreaming brought some driver fixes,
> too. I'm really sorry for any wasted time.
> 
> [...]

I have applied the following to branch ti-k3-config-next on [1].
Thank you!

[2/7] arm64: defconfig: remove SENSORS_SA67MCU
      commit: b632eb8cd72268f5fbc982442e5210dda41b0340

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh