AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and
AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update
comments to reflect this and add SAMA7G5 and SAM9X75 datasheet
references to the file header.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
drivers/watchdog/at91sam9_wdt.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 298d545df1a1..2020694f8f6f 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -3,40 +3,42 @@
* drivers/watchdog/at91sam9_wdt.h
*
* Copyright (C) 2007 Andrew Victor
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
*
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
* Based on SAM9X60 datasheet.
+ * Based on SAMA7G5 datasheet.
+ * Based on SAM9X75 datasheet.
*
*/
#ifndef AT91_WDT_H
#define AT91_WDT_H
#include <linux/bits.h>
#define AT91_WDT_CR 0x00 /* Watchdog Control Register */
#define AT91_WDT_WDRSTT BIT(0) /* Restart */
#define AT91_WDT_KEY (0xa5UL << 24) /* KEY Password */
#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */
#define AT91_WDT_WDV (0xfffUL << 0) /* Counter Value */
#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV)
#define AT91_SAM9X60_PERIODRST BIT(4) /* Period Reset */
#define AT91_SAM9X60_RPTHRST BIT(5) /* Minimum Restart Period */
#define AT91_WDT_WDFIEN BIT(12) /* Fault Interrupt Enable */
-#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable */
+#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable (SAM9X60, SAMA7G5, SAM9X75) */
#define AT91_WDT_WDRSTEN BIT(13) /* Reset Processor */
#define AT91_WDT_WDRPROC BIT(14) /* Timer Restart */
-#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable */
+#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable (SAMA5, AT91SAM9261) */
#define AT91_WDT_WDD (0xfffUL << 16) /* Delta Value */
#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD)
#define AT91_WDT_WDDBGHLT BIT(28) /* Debug Halt */
#define AT91_WDT_WDIDLEHLT BIT(29) /* Idle Halt */
#define AT91_WDT_SR 0x08 /* Watchdog Status Register */
#define AT91_WDT_WDUNF BIT(0) /* Watchdog Underflow */
#define AT91_WDT_WDERR BIT(1) /* Watchdog Error */
--
2.34.1
On 02/03/2026 17:03:10+0530, Balakrishnan Sambath wrote: > AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and > AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update > comments to reflect this and add SAMA7G5 and SAM9X75 datasheet > references to the file header. > > Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > drivers/watchdog/at91sam9_wdt.h | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h > index 298d545df1a1..2020694f8f6f 100644 > --- a/drivers/watchdog/at91sam9_wdt.h > +++ b/drivers/watchdog/at91sam9_wdt.h > @@ -3,40 +3,42 @@ > * drivers/watchdog/at91sam9_wdt.h > * > * Copyright (C) 2007 Andrew Victor > * Copyright (C) 2007 Atmel Corporation. > * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries > * > * Watchdog Timer (WDT) - System peripherals regsters. > * Based on AT91SAM9261 datasheet revision D. > * Based on SAM9X60 datasheet. > + * Based on SAMA7G5 datasheet. > + * Based on SAM9X75 datasheet. > * > */ > > #ifndef AT91_WDT_H > #define AT91_WDT_H > > #include <linux/bits.h> > > #define AT91_WDT_CR 0x00 /* Watchdog Control Register */ > #define AT91_WDT_WDRSTT BIT(0) /* Restart */ > #define AT91_WDT_KEY (0xa5UL << 24) /* KEY Password */ > > #define AT91_WDT_MR 0x04 /* Watchdog Mode Register */ > #define AT91_WDT_WDV (0xfffUL << 0) /* Counter Value */ > #define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV) > #define AT91_SAM9X60_PERIODRST BIT(4) /* Period Reset */ > #define AT91_SAM9X60_RPTHRST BIT(5) /* Minimum Restart Period */ > #define AT91_WDT_WDFIEN BIT(12) /* Fault Interrupt Enable */ > -#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable */ > +#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable (SAM9X60, SAMA7G5, SAM9X75) */ > #define AT91_WDT_WDRSTEN BIT(13) /* Reset Processor */ > #define AT91_WDT_WDRPROC BIT(14) /* Timer Restart */ > -#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable */ > +#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable (SAMA5, AT91SAM9261) */ > #define AT91_WDT_WDD (0xfffUL << 16) /* Delta Value */ > #define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD) > #define AT91_WDT_WDDBGHLT BIT(28) /* Debug Halt */ > #define AT91_WDT_WDIDLEHLT BIT(29) /* Idle Halt */ > > #define AT91_WDT_SR 0x08 /* Watchdog Status Register */ > #define AT91_WDT_WDUNF BIT(0) /* Watchdog Underflow */ > #define AT91_WDT_WDERR BIT(1) /* Watchdog Error */ > > -- > 2.34.1 > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
© 2016 - 2026 Red Hat, Inc.