Patch 1: Add yaml file for Cix Sky1 resets
Patch 2: Add driver codes for Cix Sky1 resets
Patch 3: Add dts nodes for Cix Sky1 resets
v10 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- rename dt-bindings header file
v9 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
v8 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- remove "simple-mfd" strings
v7 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix build warning
v6 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style
v5 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-controller.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style
v4 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- add syscon
- refine reset driver
- fix dt-bindings style
v3 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- remove syscon
v2 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix dt-bindings style
- refine reset driver
Gary Yang (3):
dt-bindings: soc: cix: document the syscon on Sky1 SoC
reset: add Sky1 soc reset support
arm64: dts: cix: add support for cix sky1 resets
.../soc/cix/cix,sky1-system-control.yaml | 42 ++
arch/arm64/boot/dts/cix/sky1.dtsi | 12 +
drivers/reset/Kconfig | 7 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sky1.c | 367 ++++++++++++++++++
.../reset/cix,sky1-s5-system-control.h | 163 ++++++++
.../reset/cix,sky1-system-control.h | 41 ++
7 files changed, 633 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
create mode 100644 drivers/reset/reset-sky1.c
create mode 100644 include/dt-bindings/reset/cix,sky1-s5-system-control.h
create mode 100644 include/dt-bindings/reset/cix,sky1-system-control.h
--
2.49.0