Hi Bryan,
On Wed, 2026-02-25 at 15:11 +0000, Bryan O'Donoghue wrote:
> Inspiron14 has a ov02e10 sensor on CSIPHY4. Enable the list of dependencies
> now.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
> arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 61 +++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
> index bf04a12b16bc9..d21963e52ee48 100644
> --- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
> @@ -10,6 +10,7 @@
> #include <dt-bindings/input/gpio-keys.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy.h>
> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>
> #include "hamoa-pmics.dtsi"
> @@ -792,6 +793,66 @@ vreg_l3j_0p8: ldo3 {
> };
> };
>
> +&camss {
> + status = "okay";
> +
> + ports {
> + /*
> + * port0 => csiphy0
> + * port1 => csiphy1
> + * port2 => csiphy2
> + * port3 => csiphy4
> + */
> + port@3 {
> + camss_csiphy4_inep0: endpoint@0 {
> + clock-lanes = <7>;
> + data-lanes = <0 1>;
> + remote-endpoint = <&ov02e10_ep>;
> + };
> + };
> + };
> +};
> +
> +&cci1 {
> + status = "okay";
> +};
> +
> +&cci1_i2c1 {
> + camera@10 {
> + compatible = "ovti,ov02e10";
> + reg = <0x10>;
> +
> + reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cam_rgb_default>;
> +
> + clocks = <&camcc CAM_CC_MCLK4_CLK>;
> + assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + orientation = <0>; /* front facing */
> +
> + avdd-supply = <&vreg_l7b_2p8>;
> + dvdd-supply = <&vreg_l7b_2p8>;
> + dovdd-supply = <&vreg_cam_1p8>;
> +
> + port {
> + ov02e10_ep: endpoint {
> + data-lanes = <1 2>;
> + link-frequencies = /bits/ 64 <360000000>;
> + remote-endpoint = <&camss_csiphy4_inep0>;
> + };
> + };
> + };
> +};
> +
> +&csiphy4 {
> + vdda-0p8-supply = <&vreg_l2c_0p8>;
> + vdda-1p2-supply = <&vreg_l1c_1p2>;
> +
> + status = "okay";
> +};
> +
> &i2c0 {
> clock-frequency = <400000>;
>