Hi Bryan,
On Wed, 2026-02-25 at 15:11 +0000, Bryan O'Donoghue wrote:
> Add pmic,id = m rpmh to regulator definitions. This regulator set provides
> vreg_l3m_1p8 the regulator for the ov08x40 RGB sensor on the CRD.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
> arch/arm64/boot/dts/qcom/x1-crd.dtsi | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> index ded96fb43489b..c89f5ad0aed56 100644
> --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> @@ -865,6 +865,36 @@ vreg_l3j_0p8: ldo3 {
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> };
> +
> + regulators-8 {
> + compatible = "qcom,pm8010-rpmh-regulators";
> + qcom,pmic-id = "m";
> +
> + vdd-l1-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-l4-supply = <&vreg_s4c_1p8>;
> + vdd-l7-supply = <&vreg_bob1>;
> +
> + vreg_l3m_1p8: ldo3 {
> + regulator-name = "vreg_l3m_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1808000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4m_1p8: ldo4 {
> + regulator-name = "vreg_l4m_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1808000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7m_2p9: ldo7 {
> + regulator-name = "vreg_l7m_2p9";
> + regulator-min-microvolt = <2912000>;
> + regulator-max-microvolt = <2912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> };
>
> &gpu {