The audio enable GPIO is not toggled in any critical section where it
could not sleep, allow the audio enable GPIO to sleep. This allows the
driver to operate the audio enable GPIO connected to I2C GPIO expander.

Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Baojun Xu <baojun.xu@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Kevin Lu <kevin-lu@ti.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shenghao Ding <shenghao-ding@ti.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-sound@vger.kernel.org
---
 sound/soc/codecs/tas2552.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c
index 43449d7c25843..80206c2e09462 100644
--- a/sound/soc/codecs/tas2552.c
+++ b/sound/soc/codecs/tas2552.c
@@ -487,7 +487,7 @@ static int tas2552_runtime_suspend(struct device *dev)
 	regcache_cache_only(tas2552->regmap, true);
 	regcache_mark_dirty(tas2552->regmap);
 
-	gpiod_set_value(tas2552->enable_gpio, 0);
+	gpiod_set_value_cansleep(tas2552->enable_gpio, 0);
 
 	return 0;
 }
@@ -496,7 +496,7 @@ static int tas2552_runtime_resume(struct device *dev)
 {
 	struct tas2552_data *tas2552 = dev_get_drvdata(dev);
 
-	gpiod_set_value(tas2552->enable_gpio, 1);
+	gpiod_set_value_cansleep(tas2552->enable_gpio, 1);
 
 	tas2552_sw_shutdown(tas2552, 0);
 
@@ -583,7 +583,7 @@ static int tas2552_component_probe(struct snd_soc_component *component)
 		return ret;
 	}
 
-	gpiod_set_value(tas2552->enable_gpio, 1);
+	gpiod_set_value_cansleep(tas2552->enable_gpio, 1);
 
 	ret = pm_runtime_resume_and_get(component->dev);
 	if (ret < 0) {
@@ -608,7 +608,7 @@ static int tas2552_component_probe(struct snd_soc_component *component)
 
 probe_fail:
 	pm_runtime_put_noidle(component->dev);
-	gpiod_set_value(tas2552->enable_gpio, 0);
+	gpiod_set_value_cansleep(tas2552->enable_gpio, 0);
 
 	regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies),
 					tas2552->supplies);
@@ -621,7 +621,7 @@ static void tas2552_component_remove(struct snd_soc_component *component)
 
 	pm_runtime_put(component->dev);
 
-	gpiod_set_value(tas2552->enable_gpio, 0);
+	gpiod_set_value_cansleep(tas2552->enable_gpio, 0);
 };
 
 #ifdef CONFIG_PM
-- 
2.51.0

On Fri, 20 Feb 2026 21:22:19 +0100, Marek Vasut wrote:
> The audio enable GPIO is not toggled in any critical section where it
> could not sleep, allow the audio enable GPIO to sleep. This allows the
> driver to operate the audio enable GPIO connected to I2C GPIO expander.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: tas2552: Allow audio enable GPIO to sleep
      commit: 5ebc20921b7fff9feb44de465448e17a382c9965

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark