Add the device nodes for the multimedia clock controllers videocc, gpucc
and gxclkctl.

Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 42 ++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index e269cec7942c85447892c0661f83171eded94f3b..64ed707b8b24822d59e617851a35745acc366a09 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -5,7 +5,10 @@
 
 #include <dt-bindings/clock/qcom,glymur-dispcc.h>
 #include <dt-bindings/clock/qcom,glymur-gcc.h>
+#include <dt-bindings/clock/qcom,glymur-gpucc.h>
 #include <dt-bindings/clock/qcom,glymur-tcsr.h>
+#include <dt-bindings/clock/qcom,glymur-videocc.h>
+#include <dt-bindings/clock/qcom,kaanapali-gxclkctl.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -3335,6 +3338,29 @@ hsc_noc: interconnect@2000000 {
 			#interconnect-cells = <2>;
 		};
 
+		gxclkctl: clock-controller@3d64000 {
+			compatible = "qcom,glymur-gxclkctl";
+			reg = <0x0 0x03d64000 0x0 0x6000>;
+
+			power-domains = <&rpmhpd RPMHPD_GFX>,
+					<&rpmhpd RPMHPD_GMXC>,
+					<&gpucc GPU_CC_CX_GDSC>;
+
+			#power-domain-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,glymur-gpucc";
+			reg = <0x0 0x03d90000 0x0 0x9800>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		ipcc: mailbox@3e04000 {
 			compatible = "qcom,glymur-ipcc", "qcom,ipcc";
 			reg = <0x0 0x03e04000 0x0 0x1000>;
@@ -3367,6 +3393,22 @@ lpass_ag_noc: interconnect@7e40000 {
 			#interconnect-cells = <2>;
 		};
 
+		videocc: clock-controller@0aaf0000 {
+			compatible = "qcom,glymur-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,glymur-dispcc";
 			reg = <0x0 0x0af00000 0x0 0x20000>;

-- 
2.34.1

On 2/20/26 11:16 AM, Taniya Das wrote:
> Add the device nodes for the multimedia clock controllers videocc, gpucc
> and gxclkctl.
> 
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> ---

[...]

> +		videocc: clock-controller@0aaf0000 {

stray zero in the front

> +			compatible = "qcom,glymur-videocc";
> +			reg = <0 0x0aaf0000 0 0x10000>;

Please use 0x0 for consistency

with that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad