Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
the BeagleBone Green with the Seeed Studio HDMI cape.

Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 196b6872ca463..2c9587855f044 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -751,6 +751,7 @@ CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
 CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_ITE_IT66121=m
 CONFIG_DRM_LVDS_CODEC=m
 CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m

-- 
2.43.0

On 12/02/2026 16:26, Kory Maincent (TI) wrote:
> Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
> the BeagleBone Green with the Seeed Studio HDMI cape.

This is not one option per patch. All three patches should be squashed,
because are logically one change.

Best regards,
Krzysztof

On Thu, 12 Feb 2026 16:40:14 +0100
Krzysztof Kozlowski <krzk@kernel.org> wrote:

> On 12/02/2026 16:26, Kory Maincent (TI) wrote:
> > Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
> > the BeagleBone Green with the Seeed Studio HDMI cape.  
> 
> This is not one option per patch. All three patches should be squashed,
> because are logically one change.

Ok, as you prefer.

Regards,
-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com