[PATCH] drm/solomon: Fix page start when updating rectangle in page addressing mode

Francesco Lavra posted 1 patch 2 hours ago
drivers/gpu/drm/solomon/ssd130x.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
[PATCH] drm/solomon: Fix page start when updating rectangle in page addressing mode
Posted by Francesco Lavra 2 hours ago
In page addressing mode, the pixel values of a dirty rectangle must be sent
to the display controller one page at a time. The range of pages
corresponding to a given rectangle is being incorrectly calculated as if
the Y value of the top left coordinate of the rectangle was 0. This can
result in rectangle updates being displayed on wrong parts of the screen.

Fix the above issue by consolidating the start page calculation in a single
place at the beginning of the update_rect function, and using the
calculated value for all addressing modes.

Fixes: b0daaa5cfaa5 ("drm/ssd130x: Support page addressing mode")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
---
 drivers/gpu/drm/solomon/ssd130x.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 96cf39320137..33ceed86ed36 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -737,6 +737,7 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x,
 	unsigned int height = drm_rect_height(rect);
 	unsigned int line_length = DIV_ROUND_UP(width, 8);
 	unsigned int page_height = SSD130X_PAGE_HEIGHT;
+	u8 page_start = ssd130x->page_offset + y / page_height;
 	unsigned int pages = DIV_ROUND_UP(height, page_height);
 	struct drm_device *drm = &ssd130x->drm;
 	u32 array_idx = 0;
@@ -774,14 +775,11 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x,
 	 */
 
 	if (!ssd130x->page_address_mode) {
-		u8 page_start;
-
 		/* Set address range for horizontal addressing mode */
 		ret = ssd130x_set_col_range(ssd130x, ssd130x->col_offset + x, width);
 		if (ret < 0)
 			return ret;
 
-		page_start = ssd130x->page_offset + y / page_height;
 		ret = ssd130x_set_page_range(ssd130x, page_start, pages);
 		if (ret < 0)
 			return ret;
@@ -813,7 +811,7 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x,
 		 */
 		if (ssd130x->page_address_mode) {
 			ret = ssd130x_set_page_pos(ssd130x,
-						   ssd130x->page_offset + i,
+						   page_start + i,
 						   ssd130x->col_offset + x);
 			if (ret < 0)
 				return ret;
-- 
2.39.5