The dev_dbg!, dev_info!, dev_err!, and dev_warn! macros now accept
pci::Device directly without requiring an explicit .as_ref()
conversion to device::Device, thanks to commit a38cd1fea989
("rust: device: support `dev_printk` on all devices").

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/gpu/nova-core/driver.rs   |  2 +-
 drivers/gpu/nova-core/gpu.rs      |  4 ++--
 drivers/gpu/nova-core/gsp/boot.rs | 14 +++++++-------
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/nova-core/driver.rs b/drivers/gpu/nova-core/driver.rs
index 5a4cc047bcfc..e39885c0d5ca 100644
--- a/drivers/gpu/nova-core/driver.rs
+++ b/drivers/gpu/nova-core/driver.rs
@@ -70,7 +70,7 @@ impl pci::Driver for NovaCore {
 
     fn probe(pdev: &pci::Device<Core>, _info: &Self::IdInfo) -> impl PinInit<Self, Error> {
         pin_init::pin_init_scope(move || {
-            dev_dbg!(pdev.as_ref(), "Probe Nova Core GPU driver.\n");
+            dev_dbg!(pdev, "Probe Nova Core GPU driver.\n");
 
             pdev.enable_device_mem()?;
             pdev.set_master();
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 9b042ef1a308..f5907c31a66d 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -262,13 +262,13 @@ pub(crate) fn new<'a>(
     ) -> impl PinInit<Self, Error> + 'a {
         try_pin_init!(Self {
             spec: Spec::new(pdev.as_ref(), bar).inspect(|spec| {
-                dev_info!(pdev.as_ref(),"NVIDIA ({})\n", spec);
+                dev_info!(pdev, "NVIDIA ({})\n", spec);
             })?,
 
             // We must wait for GFW_BOOT completion before doing any significant setup on the GPU.
             _: {
                 gfw::wait_gfw_boot_completion(bar)
-                    .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete\n"))?;
+                    .inspect_err(|_| dev_err!(pdev, "GFW boot did not complete\n"))?;
             },
 
             sysmem_flush: SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?,
diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index be427fe26a58..bd6e6dc57e85 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -171,14 +171,14 @@ pub(crate) fn boot(
             Some((libos_handle >> 32) as u32),
         )?;
         dev_dbg!(
-            pdev.as_ref(),
+            pdev,
             "GSP MBOX0: {:#x}, MBOX1: {:#x}\n",
             mbox0,
             mbox1
         );
 
         dev_dbg!(
-            pdev.as_ref(),
+            pdev,
             "Using SEC2 to load and run the booter_load firmware...\n"
         );
 
@@ -191,7 +191,7 @@ pub(crate) fn boot(
             Some((wpr_handle >> 32) as u32),
         )?;
         dev_dbg!(
-            pdev.as_ref(),
+            pdev,
             "SEC2 MBOX0: {:#x}, MBOX1{:#x}\n",
             mbox0,
             mbox1
@@ -199,7 +199,7 @@ pub(crate) fn boot(
 
         if mbox0 != 0 {
             dev_err!(
-                pdev.as_ref(),
+                pdev,
                 "Booter-load failed with error {:#x}\n",
                 mbox0
             );
@@ -217,7 +217,7 @@ pub(crate) fn boot(
         )?;
 
         dev_dbg!(
-            pdev.as_ref(),
+            pdev,
             "RISC-V active? {}\n",
             gsp_falcon.is_riscv_active(bar),
         );
@@ -239,8 +239,8 @@ pub(crate) fn boot(
         // Obtain and display basic GPU information.
         let info = commands::get_gsp_info(&mut self.cmdq, bar)?;
         match info.gpu_name() {
-            Ok(name) => dev_info!(pdev.as_ref(), "GPU name: {}\n", name),
-            Err(e) => dev_warn!(pdev.as_ref(), "GPU name unavailable: {:?}\n", e),
+            Ok(name) => dev_info!(pdev, "GPU name: {}\n", name),
+            Err(e) => dev_warn!(pdev, "GPU name unavailable: {:?}\n", e),
         }
 
         Ok(())
-- 
2.53.0