[PATCH v2 0/3] Add i.MX943 PCIe supports

Richard Zhu posted 3 patches 10 hours ago
arch/arm64/boot/dts/freescale/imx94.dtsi     | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi    | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 247 insertions(+)
[PATCH v2 0/3] Add i.MX943 PCIe supports
Posted by Richard Zhu 10 hours ago
This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
attention to that it relies on the patch-set[1], and the PCIe1 port on
the EVK board relies on the {2].

Both of them are queuing up to be included in the coming 6.20 kernel.
[1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
[2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/

Changes in v2:
- Refine the nodes sequence refer to Frank's comments.
- Rely on [3], and remove the duplacated codes mentioned by Sherry.
[3] https://patchwork.kernel.org/project/imx/patch/20260204022306.2372889-1-sherry.sun@nxp.com/

[PATCH v2 1/3] arm64: dts: imx94: add pcie0 and pcie0-ep supports
[PATCH v2 2/3] arm64: dts: imx943: add pcie1 and pcie1-ep supports
[PATCH v2 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1]

arch/arm64/boot/dts/freescale/imx94.dtsi     | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi    | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 247 insertions(+)