From: Chuan Liu <chuan.liu@amlogic.com>
Add support for Amlogic standardized model clock control units on A9
SoC family. The standardized models include:
- composite-ccu
- noglitch-ccu
- sysbus-ccu
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
---
drivers/clk/amlogic/Kconfig | 19 ++
drivers/clk/amlogic/Makefile | 3 +
drivers/clk/amlogic/a9-model-ccu.c | 465 +++++++++++++++++++++++++++++++++++++
3 files changed, 487 insertions(+)
diff --git a/drivers/clk/amlogic/Kconfig b/drivers/clk/amlogic/Kconfig
index 216fe98a413b..6e954c9388dc 100644
--- a/drivers/clk/amlogic/Kconfig
+++ b/drivers/clk/amlogic/Kconfig
@@ -10,3 +10,22 @@ config COMMON_CLK_AMLOGIC
This driver provides the basic clock infrastructure for Amlogic SoCs,
offering read and write interfaces for various clock control units.
Select Y if your target SoC needs clock driver support.
+
+config COMMON_CLK_AMLOGIC_MODEL
+ tristate "Amlogic Standardized Model Clock Control Units"
+ depends on COMMON_CLK_AMLOGIC
+ help
+ Supports standardized model clock control units commonly used in Amlogic
+ SoC clock trees, such as composite-ccu, noglitch-ccu, and sysbus-ccu.
+ Most peripheral clock controllers in Amlogic SoCs are composed of
+ these models. Select Y if the current SoC contains these clock control
+ unit models.
+
+config COMMON_CLK_AMLOGIC_A9
+ tristate "Amlogic A9 Family Clock Controller"
+ depends on COMMON_CLK_AMLOGIC
+ default COMMON_CLK_AMLOGIC
+ select COMMON_CLK_AMLOGIC_MODEL
+ help
+ Support for the clock controller present on the Amlogic A9 family
+ SoCs. Select Y if A9 family SoC needs to support clock controller.
diff --git a/drivers/clk/amlogic/Makefile b/drivers/clk/amlogic/Makefile
index 6956592c41c8..ef3fb57cae9f 100644
--- a/drivers/clk/amlogic/Makefile
+++ b/drivers/clk/amlogic/Makefile
@@ -8,3 +8,6 @@ clk-amlogic-y += clk-composite.o
clk-amlogic-y += clk-dualdiv.o
clk-amlogic-y += clk-noglitch.o
clk-amlogic-y += clk-pll.o
+ifneq ($(CONFIG_COMMON_CLK_AMLOGIC_MODEL),)
+clk-amlogic-y += a9-model-ccu.o
+endif
diff --git a/drivers/clk/amlogic/a9-model-ccu.c b/drivers/clk/amlogic/a9-model-ccu.c
new file mode 100644
index 000000000000..5d5bf1538f73
--- /dev/null
+++ b/drivers/clk/amlogic/a9-model-ccu.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (c) 2026 Amlogic, Inc. All rights reserved
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include "clk.h"
+#include "clk-basic.h"
+#include "clk-composite.h"
+#include "clk-noglitch.h"
+
+/*
+ * The standardized model clock control units of Amlogic includes:
+ * - composite-ccu
+ * - noglitch-ccu
+ * - sysbus-ccu
+ */
+#define MAX_AML_CLK_COMP_PARENTS 8
+
+enum aml_clk_model_type {
+ CLK_MODEL_COMPOSITE = 1,
+ CLK_MODEL_NOGLITCH = 2,
+ CLK_MODEL_SYSBUS = 3,
+};
+
+struct aml_clk_model_data {
+ enum aml_clk_model_type type;
+};
+
+static int of_aml_clk_model_get_type(struct device *dev,
+ enum aml_clk_type *out_type)
+{
+ const struct aml_clk_model_data *data;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EFAULT;
+
+ switch (data->type) {
+ case CLK_MODEL_COMPOSITE:
+ *out_type = AML_CLKTYPE_COMPOSITE;
+ return 0;
+
+ case CLK_MODEL_NOGLITCH:
+ *out_type = AML_CLKTYPE_NOGLITCH;
+ return 0;
+
+ case CLK_MODEL_SYSBUS:
+ *out_type = AML_CLKTYPE_GATE;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * A diagram of the A9 composite-ccu is as follows:
+ * +----------------------------------+
+ * | |
+ * | |\ |
+ * clk0 ------>| | |
+ * clk1 ------>| | |
+ * clk2 ------>| | |
+ * clk3 ------>| | +-----+ +------+ |
+ * | | |---->| div |---->| gate |------> clk out
+ * clk4 ------>| | +-----+ +------+ |
+ * clk5 ------>| | |
+ * clk6 ------>| | |
+ * clk7 ------>| | |
+ * | |/ |
+ * | |
+ * +----------------------------------+
+ */
+static int
+of_aml_clk_model_composite_init_register(struct device *dev,
+ struct clk_hw_onecell_data *hw_data)
+{
+ struct device_node *np = dev_of_node(dev);
+ struct aml_clk *clk;
+ struct aml_clk_composite_data *composite;
+ u32 reg_val[3];
+ unsigned int pcnt = of_clk_get_parent_count(np);
+ struct clk_parent_data pdata[MAX_AML_CLK_COMP_PARENTS];
+ struct clk_parent_data pdata_compb[MAX_AML_CLK_COMP_PARENTS];
+ u8 pnum, pnum_compb;
+ u32 *ptab, *ptab_compb;
+ struct clk_init_data init = { 0 };
+ int index;
+ int ret, clkid, i;
+
+ ret = of_aml_clk_get_parent_data(dev, hw_data->hws, 0, 7, pdata, &pnum);
+ if (ret)
+ return ret;
+
+ ptab = of_aml_clk_get_parent_table(dev, 0, 7);
+ if (IS_ERR(ptab))
+ return PTR_ERR(ptab);
+
+ /*
+ * If the number of "clocks" defined in DT is less than or equal
+ * to MAX_AML_CLK_COMP_PARENTS, composite-ccu_a and composite-ccu_b
+ * share the same parent clocks.
+ *
+ * If the number of "clocks" defined in the DT is greater than
+ * MAX_AML_CLK_COMP_PARENTS, composite-ccu_a and composite-ccu_b have
+ * different parent clocks, the parent clocks specified by
+ * "clocks" follow the rule below:
+ * - for composite-ccu_a: clocks indices 0-7 in "clocks"
+ * - for composite-ccu_b: clocks indices 8-15 in "clocks"
+ */
+ if (pcnt > MAX_AML_CLK_COMP_PARENTS) { /* composite-ccu_b */
+ ret = of_aml_clk_get_parent_data(dev, hw_data->hws, 8, 15,
+ pdata_compb, &pnum_compb);
+ if (ret)
+ return ret;
+
+ ptab_compb = of_aml_clk_get_parent_table(dev, 8, 15);
+ if (IS_ERR(ptab_compb))
+ return PTR_ERR(ptab_compb);
+ }
+
+ init.ops = &aml_clk_composite_ops;
+ for (clkid = 0; clkid < hw_data->num; clkid++) {
+ init.name = of_aml_clk_get_name_index(np, clkid);
+ if (!init.name)
+ return -EINVAL;
+
+ /*
+ * The set of "amlogic,reg-layout" attributes of composite_ccu
+ * contains three u32 data:
+ * - reg_offset
+ * - bit_offset
+ * - div_width
+ */
+ index = clkid * 3;
+ for (i = 0; i < 3; i++) {
+ ret = of_property_read_u32_index(np,
+ "amlogic,reg-layout",
+ index + i, ®_val[i]);
+ if (ret)
+ return ret;
+ }
+
+ composite = devm_kzalloc(dev, sizeof(*composite), GFP_KERNEL);
+ if (!composite)
+ return -ENOMEM;
+
+ composite->reg_offset = reg_val[0];
+ composite->bit_offset = reg_val[1];
+ composite->div_width = reg_val[2];
+
+ /*
+ * The register bit allocation for composite-ccu_a and
+ * composite-ccu_b is as follows:
+ * - composite-ccu_a: bit[15: 0]
+ * - composite-ccu_b: bit[31: 16]
+ * A value of "composite->bit_offset == 16" indicates that this
+ * CCU corresponds to composite-ccu_b.
+ */
+ if (pcnt > MAX_AML_CLK_COMP_PARENTS &&
+ composite->bit_offset == 16) { /* composite-ccu_b */
+ init.num_parents = pnum_compb;
+ init.parent_data = pdata_compb;
+
+ if (ptab_compb)
+ composite->table = ptab_compb;
+ } else { /* composite-ccu_a */
+ init.num_parents = pnum;
+ init.parent_data = pdata;
+
+ if (ptab)
+ composite->table = ptab;
+ }
+
+ clk = to_aml_clk(hw_data->hws[clkid]);
+ clk->data = composite;
+
+ hw_data->hws[clkid]->init = &init;
+ ret = of_aml_clk_register(dev, hw_data->hws[clkid], clkid);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * A diagram of the A9 noglitch-ccu is as follows:
+ * +---------------------------------------------+
+ * | |\ |
+ * clk0 ------>| | |
+ * clk1 ------>| | |
+ * clk2 ------>| | |
+ * clk3 ------>| | +-----+ +------+ |\ |
+ * | | |----->| div |----->| gate |----->| | |
+ * clk4 ------>| | +-----+ +------+ | | |
+ * clk5 ------>| | | | |
+ * clk6 ------>| | | | |
+ * clk7 ------>| | | | |
+ * | |/ | | |
+ * | | |-------> clk out
+ * | |\ | | |
+ * clk0 ------>| | | | |
+ * clk1 ------>| | | | |
+ * clk2 ------>| | | | |
+ * clk3 ------>| | +-----+ +------+ | | |
+ * | | |----->| div |---->| gate |------>| | |
+ * clk4 ------>| | +-----+ +------+ |/ |
+ * clk5 ------>| | |
+ * clk6 ------>| | |
+ * clk7 ------>| | |
+ * | |/ |
+ * +---------------------------------------------+
+ */
+static int
+of_aml_clk_model_noglitch_init_register(struct device *dev,
+ struct clk_hw_onecell_data *hw_data)
+{
+ struct device_node *np = dev_of_node(dev);
+ struct aml_clk *clk;
+ struct aml_clk_noglitch_data *noglitch;
+ struct clk_parent_data pdata[MAX_AML_CLK_COMP_PARENTS];
+ u8 pnum;
+ u32 *ptab;
+ struct clk_init_data init = { 0 };
+ int ret, clkid;
+
+ /* noglitch-ccu supports up to eight parent clocks. */
+ ret = of_aml_clk_get_parent_data(dev, hw_data->hws, 0, 7, pdata, &pnum);
+ if (ret)
+ return ret;
+
+ ptab = of_aml_clk_get_parent_table(dev, 0, 7);
+ if (IS_ERR(ptab))
+ return PTR_ERR(ptab);
+
+ init.ops = &aml_clk_noglitch_ops;
+ init.num_parents = pnum;
+ init.parent_data = pdata;
+ for (clkid = 0; clkid < hw_data->num; clkid++) {
+ init.name = of_aml_clk_get_name_index(np, clkid);
+ if (!init.name)
+ return -EINVAL;
+
+ hw_data->hws[clkid]->init = &init;
+
+ noglitch = devm_kzalloc(dev, sizeof(*noglitch), GFP_KERNEL);
+ if (!noglitch)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_index(np, "amlogic,reg-layout",
+ clkid, &noglitch->reg_offset);
+ if (ret)
+ return ret;
+
+ if (ptab)
+ noglitch->table = ptab;
+
+ clk = to_aml_clk(hw_data->hws[clkid]);
+ clk->data = noglitch;
+
+ ret = of_aml_clk_register(dev, hw_data->hws[clkid], clkid);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * A diagram of the A9 sysbus-ccu is as follows:
+ * +-------------------+
+ * | |
+ * | +------+ |
+ * | +---->| gate |----->clkout0
+ * | | +------+ |
+ * | | |
+ * | | |
+ * | | |
+ * | | +------+ |
+ * clk in-----+---->| gate |----->clkout1
+ * | | +------+ |
+ * | | ... |
+ * | | |
+ * | | |
+ * | | +------+ |
+ * | +---->| gate |----->clkoutn
+ * | +------+ |
+ * | |
+ * +-------------------+
+ */
+static int
+of_aml_clk_model_sysbus_init_register(struct device *dev,
+ struct clk_hw_onecell_data *hw_data)
+{
+ struct device_node *np = dev_of_node(dev);
+ struct aml_clk *clk;
+ struct aml_clk_gate_data *gate;
+ u32 reg_val[2];
+ struct clk_parent_data pdata;
+ u8 pnum;
+ struct clk_init_data init = { 0 };
+ int index;
+ int ret, clkid, i;
+
+ ret = of_aml_clk_get_parent_data(dev, hw_data->hws, 0, 0, &pdata, &pnum);
+ if (ret)
+ return ret;
+
+ init.ops = &aml_clk_gate_ops;
+ init.num_parents = pnum;
+ init.parent_data = &pdata;
+ for (clkid = 0; clkid < hw_data->num; clkid++) {
+ init.name = of_aml_clk_get_name_index(np, clkid);
+ if (!init.name)
+ return -EINVAL;
+
+ /*
+ * The set of "amlogic,reg-layout" attributes of sysbus_ccu
+ * contains three u32 data:
+ * - reg_offset
+ * - bit_idx
+ */
+ index = clkid * 2;
+ for (i = 0; i < 2; i++) {
+ ret = of_property_read_u32_index(np,
+ "amlogic,reg-layout",
+ index + i, ®_val[i]);
+ if (ret)
+ return ret;
+ }
+
+ gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return -ENOMEM;
+
+ gate->reg_offset = reg_val[0];
+ gate->bit_idx = reg_val[1];
+
+ clk = to_aml_clk(hw_data->hws[clkid]);
+ clk->data = gate;
+
+ hw_data->hws[clkid]->init = &init;
+ ret = of_aml_clk_register(dev, hw_data->hws[clkid], clkid);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int of_aml_clk_model_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct aml_clk_model_data *data;
+ struct device_node *np = dev_of_node(dev);
+ struct regmap *regmap;
+ struct clk_hw_onecell_data *hw_data;
+ struct aml_clk *clk;
+ enum aml_clk_type clk_type;
+ int clk_num;
+ int ret, i;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EFAULT;
+
+ clk_num = of_aml_clk_get_count(np);
+ if (clk_num == 0)
+ return -EINVAL;
+
+ regmap = aml_clk_regmap_init(pdev);
+ if (IS_ERR_OR_NULL(regmap))
+ return -EIO;
+
+ of_aml_clk_regs_init(dev);
+
+ hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, clk_num),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ hw_data->num = clk_num;
+ clk = devm_kcalloc(dev, clk_num, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return -ENOMEM;
+
+ ret = of_aml_clk_model_get_type(dev, &clk_type);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < clk_num; i++) {
+ clk[i].map = regmap;
+ clk[i].type = clk_type;
+ hw_data->hws[i] = &clk[i].hw;
+ }
+
+ if (data->type == CLK_MODEL_COMPOSITE)
+ ret = of_aml_clk_model_composite_init_register(dev, hw_data);
+ else if (data->type == CLK_MODEL_NOGLITCH)
+ ret = of_aml_clk_model_noglitch_init_register(dev, hw_data);
+ else if (data->type == CLK_MODEL_SYSBUS)
+ ret = of_aml_clk_model_sysbus_init_register(dev, hw_data);
+
+ if (clk_num == 1)
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ &clk->hw);
+ else
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ hw_data);
+}
+
+static const struct aml_clk_model_data aml_composite_dev_data = {
+ .type = CLK_MODEL_COMPOSITE,
+};
+
+static const struct aml_clk_model_data aml_noglitch_dev_data = {
+ .type = CLK_MODEL_NOGLITCH,
+};
+
+static const struct aml_clk_model_data aml_sysbus_dev_data = {
+ .type = CLK_MODEL_SYSBUS,
+};
+
+static const struct of_device_id of_aml_clk_model_match_table[] = {
+ {
+ .compatible = "amlogic,a9-composite-ccu",
+ .data = &aml_composite_dev_data,
+ },
+ {
+ .compatible = "amlogic,a9-composite-ccu-mult",
+ .data = &aml_composite_dev_data,
+ },
+ {
+ .compatible = "amlogic,a9-noglitch-ccu",
+ .data = &aml_noglitch_dev_data,
+ },
+ {
+ .compatible = "amlogic,a9-noglitch-ccu-mult",
+ .data = &aml_noglitch_dev_data,
+ },
+ {
+ .compatible = "amlogic,a9-sysbus-ccu",
+ .data = &aml_sysbus_dev_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_aml_clk_model_match_table);
+
+static struct platform_driver of_aml_clk_model_driver = {
+ .probe = of_aml_clk_model_probe,
+ .driver = {
+ .name = "aml-clk-model",
+ .of_match_table = of_aml_clk_model_match_table,
+ },
+};
+module_platform_driver(of_aml_clk_model_driver);
+
+MODULE_DESCRIPTION("Amlogic A9 Standardized Model Clock Control Units Driver");
+MODULE_AUTHOR("Chuan Liu <chuan.liu@amlogic.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("CLK_AMLOGIC");
--
2.42.0© 2016 - 2026 Red Hat, Inc.