The Winbond w25q256jwm device supports four Block Protect (BP) bits and
uses Status Register bit 6 as the Top/Bottom (TB) protect bit.

Update the flash parameters by enabling SPI_NOR_4BIT_BP and
SPI_NOR_TB_SR_BIT6. Without these flags, the locking configuration is
incorrect.

Reference:
https://www.winbond.com/hq/support/documentation/levelOne.jsp?__locale=en&DocNo=DA00-W25Q256JW.1

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
 drivers/mtd/spi-nor/winbond.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index fb855fe44733..55f1209936d5 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -337,7 +337,7 @@ static const struct flash_info winbond_nor_parts[] = {
 		.id = SNOR_ID(0xef, 0x80, 0x19),
 		.name = "w25q256jwm",
 		.size = SZ_32M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 | SPI_NOR_4BIT_BP,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xef, 0x80, 0x20),
-- 
2.47.3