Add supply properties that match the P1 PMIC's actual hardware topology
where each buck converter has its own VIN pin and LDO groups share
common input pins. Supply names are defined according to the pinout
names in the P1 datasheet.

The existing "vin-supply" is dropped from the binding document as the
updated spacemit P1 driver no longer parses it. Only the per-rail names
("vin1-supply", "vin2-supply", ...) are supported.

Signed-off-by: Guodong Xu <guodong@riscstar.com>
---
v4: Drop vin-supply and update the commit message.
     Intermittent dtbs_check warnings are expected while the binding and
     DTS changes land through different trees, but will resolve once both
     are merged.
v3: Mark vin-supply as deprecated.
v2: Remove providers from the dts example.
    Pass the 'make dt_binding_check' test.
---
 .../devicetree/bindings/mfd/spacemit,p1.yaml       | 49 +++++++++++++++++++++-
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
index c6593ac6ef6adb72fc48af570dc13fc9edf77ccb..c67b1c6e4e4f9235bd3965be6b68f397734530a5 100644
--- a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
+++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
@@ -27,8 +27,41 @@ properties:
   interrupts:
     maxItems: 1
 
-  vin-supply:
-    description: Input supply phandle.
+  vin1-supply:
+    description:
+      Power supply for BUCK1. Required if BUCK1 is defined.
+
+  vin2-supply:
+    description:
+      Power supply for BUCK2. Required if BUCK2 is defined.
+
+  vin3-supply:
+    description:
+      Power supply for BUCK3. Required if BUCK3 is defined.
+
+  vin4-supply:
+    description:
+      Power supply for BUCK4. Required if BUCK4 is defined.
+
+  vin5-supply:
+    description:
+      Power supply for BUCK5. Required if BUCK5 is defined.
+
+  vin6-supply:
+    description:
+      Power supply for BUCK6. Required if BUCK6 is defined.
+
+  aldoin-supply:
+    description:
+      Power supply for ALDO1-4. Required if any are defined.
+
+  dldoin1-supply:
+    description:
+      Power supply for DLDO1-4. Required if any are defined.
+
+  dldoin2-supply:
+    description:
+      Power supply for DLDO5-7. Required if any are defined.
 
   regulators:
     type: object
@@ -58,6 +91,10 @@ examples:
             compatible = "spacemit,p1";
             reg = <0x41>;
             interrupts = <64>;
+            vin1-supply = <&reg_vcc_5v>;
+            vin5-supply = <&reg_vcc_5v>;
+            aldoin-supply = <&reg_vcc_5v>;
+            dldoin1-supply = <&buck5>;
 
             regulators {
                 buck1 {
@@ -68,6 +105,14 @@ examples:
                     regulator-always-on;
                 };
 
+                buck5: buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3450000>;
+                    regulator-ramp-delay = <5000>;
+                    regulator-always-on;
+                };
+
                 aldo1 {
                     regulator-name = "aldo1";
                     regulator-min-microvolt = <500000>;

-- 
2.43.0

Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable