From: George Moussalem <george.moussalem@outlook.com>

Describe the PWM block on IPQ5018.

Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 6f8004a22a1ffdb6da0be410b772be5fe0473eef..edff89257468cc5535a68321123c8a6cd0fb5adb 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -453,6 +453,16 @@ tcsr: syscon@1937000 {
 			reg = <0x01937000 0x21000>;
 		};
 
+		pwm: pwm@1941010 {
+			compatible = "qcom,ipq5018-pwm", "qcom,ipq6018-pwm";
+			reg = <0x01941010 0x20>;
+			clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clock-rates = <100000000>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;

-- 
2.52.0

On 2/4/26 12:25 PM, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@outlook.com>
> 
> Describe the PWM block on IPQ5018.
> 
> Although PWM is in the TCSR area, make pwm its own node as simple-mfd
> has been removed from the bindings and as such hardware components
> should have its own node.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad