Refactor the device tree parsing logic in axis_fifo_probe() to reduce
code duplication and improve readability.

Create a helper function axis_fifo_get_u32() to handle property reading
and error checking, replacing repetitive of_property_read_u32() calls.

This eliminates the goto logic for error handling in the probe path and
consolidates error logging.

Signed-off-by: Gustavo Piaz da Silva <gustavopiazdasilva2102@gmail.com>
Changes in v5:
 - Added missing newline at the end of the file.

Changes in v4:
 - Removed extra blank lines in the commit message.
 - Added "rx" and "tx" prefixes to error messages to distinguish between read and write width failures.

Changes in v3:
 - Split the original v2 patch into two separate patches.
 drivers/staging/axis-fifo/axis-fifo.c | 75 +++++++++------------------
 1 file changed, 24 insertions(+), 51 deletions(-)

diff --git a/drivers/staging/axis-fifo/axis-fifo.c b/drivers/staging/axis-fifo/axis-fifo.c
index 7bc7bf191250..08717b48b1ce 100644
--- a/drivers/staging/axis-fifo/axis-fifo.c
+++ b/drivers/staging/axis-fifo/axis-fifo.c
@@ -482,68 +482,41 @@ static void axis_fifo_debugfs_init(struct axis_fifo *fifo)
 			    &axis_fifo_debugfs_regs_fops);
 }
 
-static int axis_fifo_parse_dt(struct axis_fifo *fifo)
+static int axis_fifo_get_u32(struct axis_fifo *fifo, const char *prop, u32 *val)
 {
-	int ret;
-	unsigned int value;
-	struct device_node *node = fifo->dt_device->of_node;
+	int ret = of_property_read_u32(fifo->dt_device->of_node, prop, val);
 
-	ret = of_property_read_u32(node, "xlnx,axi-str-rxd-tdata-width",
-				   &value);
 	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,axi-str-rxd-tdata-width property\n");
-		goto end;
-	} else if (value != 32) {
-		dev_err(fifo->dt_device, "xlnx,axi-str-rxd-tdata-width only supports 32 bits\n");
-		ret = -EIO;
-		goto end;
+		dev_err(fifo->dt_device, "missing %s property\n", prop);
+		return ret;
 	}
+	return 0;
+}
 
-	ret = of_property_read_u32(node, "xlnx,axi-str-txd-tdata-width",
-				   &value);
-	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,axi-str-txd-tdata-width property\n");
-		goto end;
-	} else if (value != 32) {
-		dev_err(fifo->dt_device, "xlnx,axi-str-txd-tdata-width only supports 32 bits\n");
-		ret = -EIO;
-		goto end;
-	}
+static int axis_fifo_parse_dt(struct axis_fifo *fifo)
+{
+	u32 width;
 
-	ret = of_property_read_u32(node, "xlnx,rx-fifo-depth",
-				   &fifo->rx_fifo_depth);
-	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,rx-fifo-depth property\n");
-		ret = -EIO;
-		goto end;
+	if (axis_fifo_get_u32(fifo, "xlnx,axi-str-rxd-tdata-width", &width) || width != 32) {
+		dev_err(fifo->dt_device, "rx tdata-width only supports 32 bits\n");
+		return -EIO;
 	}
-
-	ret = of_property_read_u32(node, "xlnx,tx-fifo-depth",
-				   &fifo->tx_fifo_depth);
-	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,tx-fifo-depth property\n");
-		ret = -EIO;
-		goto end;
+	if (axis_fifo_get_u32(fifo, "xlnx,axi-str-txd-tdata-width", &width) || width != 32) {
+		dev_err(fifo->dt_device, "tx tdata-width only supports 32 bits\n");
+		return -EIO;
 	}
 
-	ret = of_property_read_u32(node, "xlnx,use-rx-data",
-				   &fifo->has_rx_fifo);
-	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,use-rx-data property\n");
-		ret = -EIO;
-		goto end;
-	}
+	if (axis_fifo_get_u32(fifo, "xlnx,rx-fifo-depth", &fifo->rx_fifo_depth))
+		return -EIO;
+	if (axis_fifo_get_u32(fifo, "xlnx,tx-fifo-depth", &fifo->tx_fifo_depth))
+		return -EIO;
 
-	ret = of_property_read_u32(node, "xlnx,use-tx-data",
-				   &fifo->has_tx_fifo);
-	if (ret) {
-		dev_err(fifo->dt_device, "missing xlnx,use-tx-data property\n");
-		ret = -EIO;
-		goto end;
-	}
+	if (axis_fifo_get_u32(fifo, "xlnx,use-rx-data", &fifo->has_rx_fifo))
+		return -EIO;
+	if (axis_fifo_get_u32(fifo, "xlnx,use-tx-data", &fifo->has_tx_fifo))
+		return -EIO;
 
-end:
-	return ret;
+	return 0;
 }
 
 static int axis_fifo_probe(struct platform_device *pdev)
-- 
2.52.0