From: Arnd Bergmann <arnd@arndb.de>

The added print statement from a recent fix causes the
driver to fail building when CONFIG_PM is disabled:

drivers/ufs/host/ufs-mediatek.c: In function 'ufs_mtk_resume':
drivers/ufs/host/ufs-mediatek.c:1890:40: error: 'struct dev_pm_info' has no member named 'request'
 1890 |                         hba->dev->power.request,

It seems unlikely that the driver can work at all without
CONFIG_PM, so just add a dependency and remove the existing
ifdef checks, rather than adding another ifdef.

Fixes: 15ef3f5aa822 ("scsi: ufs: host: mediatek: Enhance recovery on resume failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/ufs/host/Kconfig        |  1 +
 drivers/ufs/host/ufs-mediatek.c | 12 +++---------
 include/ufs/ufshcd.h            |  4 ----
 3 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
index 7d5117b2dab4..964ae70e7390 100644
--- a/drivers/ufs/host/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -72,6 +72,7 @@ config SCSI_UFS_QCOM
 config SCSI_UFS_MEDIATEK
 	tristate "Mediatek specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_MEDIATEK
+	depends on PM
 	depends on RESET_CONTROLLER
 	select PHY_MTK_UFS
 	select RESET_TI_SYSCON
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 66b11cc0703b..b3daaa07e925 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -2437,7 +2437,6 @@ static void ufs_mtk_remove(struct platform_device *pdev)
 	ufshcd_pltfrm_remove(pdev);
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int ufs_mtk_system_suspend(struct device *dev)
 {
 	struct ufs_hba *hba = dev_get_drvdata(dev);
@@ -2484,9 +2483,7 @@ static int ufs_mtk_system_resume(struct device *dev)
 
 	return ret;
 }
-#endif
 
-#ifdef CONFIG_PM
 static int ufs_mtk_runtime_suspend(struct device *dev)
 {
 	struct ufs_hba *hba = dev_get_drvdata(dev);
@@ -2525,13 +2522,10 @@ static int ufs_mtk_runtime_resume(struct device *dev)
 
 	return ufshcd_runtime_resume(dev);
 }
-#endif
 
 static const struct dev_pm_ops ufs_mtk_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend,
-				ufs_mtk_system_resume)
-	SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend,
-			   ufs_mtk_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend, ufs_mtk_system_resume)
+	RUNTIME_PM_OPS(ufs_mtk_runtime_suspend, ufs_mtk_runtime_resume, NULL)
 	.prepare	 = ufshcd_suspend_prepare,
 	.complete	 = ufshcd_resume_complete,
 };
@@ -2541,7 +2535,7 @@ static struct platform_driver ufs_mtk_pltform = {
 	.remove = ufs_mtk_remove,
 	.driver = {
 		.name   = "ufshcd-mtk",
-		.pm     = &ufs_mtk_pm_ops,
+		.pm     = pm_ptr(&ufs_mtk_pm_ops),
 		.of_match_table = ufs_mtk_of_match,
 	},
 };
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index a64c19563b03..8563b6648976 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -1344,17 +1344,13 @@ static inline void *ufshcd_get_variant(struct ufs_hba *hba)
 	return hba->priv;
 }
 
-#ifdef CONFIG_PM
 extern int ufshcd_runtime_suspend(struct device *dev);
 extern int ufshcd_runtime_resume(struct device *dev);
-#endif
-#ifdef CONFIG_PM_SLEEP
 extern int ufshcd_system_suspend(struct device *dev);
 extern int ufshcd_system_resume(struct device *dev);
 extern int ufshcd_system_freeze(struct device *dev);
 extern int ufshcd_system_thaw(struct device *dev);
 extern int ufshcd_system_restore(struct device *dev);
-#endif
 
 extern int ufshcd_dme_reset(struct ufs_hba *hba);
 extern int ufshcd_dme_enable(struct ufs_hba *hba);
-- 
2.39.5

Arnd,

> The added print statement from a recent fix causes the driver to fail
> building when CONFIG_PM is disabled:

Applied to 6.20/scsi-staging, thanks!

-- 
Martin K. Petersen

Il 02/02/26 10:50, Arnd Bergmann ha scritto:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The added print statement from a recent fix causes the
> driver to fail building when CONFIG_PM is disabled:
> 
> drivers/ufs/host/ufs-mediatek.c: In function 'ufs_mtk_resume':
> drivers/ufs/host/ufs-mediatek.c:1890:40: error: 'struct dev_pm_info' has no member named 'request'
>   1890 |                         hba->dev->power.request,
> 
> It seems unlikely that the driver can work at all without
> CONFIG_PM, so just add a dependency and remove the existing
> ifdef checks, rather than adding another ifdef.
> 
> Fixes: 15ef3f5aa822 ("scsi: ufs: host: mediatek: Enhance recovery on resume failure")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>