From: Yijie Yang <yijie.yang@oss.qualcomm.com>
The PURWA-IOT-EVK is an evaluation platform for IoT products, composed of
the Purwa IoT SoM and a carrier board. Together, they form a complete
embedded system capable of booting to UART.
PURWA-IOT-EVK uses the PS8833 as a retimer for USB0, unlike HAMOA-IOT-EVK.
Meanwhile, USB0 bypasses the SBU selector FSUSB42.
Make the following peripherals on the carrier board enabled:
- UART
- On-board regulators
- USB Type-C mux
- Pinctrl
- Embedded USB (EUSB) repeaters
- NVMe
- pmic-glink
- USB DisplayPorts
- Bluetooth
- WLAN
- Audio
- PCIe ports for PCIe3 through PCIe6a
- TPM
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../{hamoa-iot-evk.dts => purwa-iot-evk.dts} | 92 +++++++++++++------
2 files changed, 65 insertions(+), 28 deletions(-)
copy arch/arm64/boot/dts/qcom/{hamoa-iot-evk.dts => purwa-iot-evk.dts} (95%)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f80b5d9cf1e8..d42296ed302e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
+dtb-$(CONFIG_ARCH_QCOM) += purwa-iot-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-particle-tachyon.dtb
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
similarity index 95%
copy from arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
copy to arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
index 2390648a248f..fe539b1f4567 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
@@ -6,12 +6,12 @@
/dts-v1/;
#include <dt-bindings/leds/common.h>
-#include "hamoa-iot-som.dtsi"
+#include "purwa-iot-som.dtsi"
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
- model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
- compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
+ model = "Qualcomm Technologies, Inc. Purwa IoT EVK";
+ compatible = "qcom,purwa-iot-evk", "qcom,purwa-iot-som", "qcom,x1p42100";
chassis-type = "embedded";
aliases {
@@ -118,15 +118,15 @@ port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ remote-endpoint = <&retimer_ss0_ss_out>;
};
};
port@2 {
reg = <2>;
- pmic_glink_ss0_sbu: endpoint {
- remote-endpoint = <&usb_1_ss0_sbu_mux>;
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
};
};
};
@@ -618,25 +618,6 @@ platform {
};
};
- usb-1-ss0-sbu-mux {
- compatible = "onnn,fsusb42", "gpio-sbu-mux";
-
- enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
- select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&usb_1_ss0_sbu_default>;
- pinctrl-names = "default";
-
- mode-switch;
- orientation-switch;
-
- port {
- usb_1_ss0_sbu_mux: endpoint {
- remote-endpoint = <&pmic_glink_ss0_sbu>;
- };
- };
- };
-
wcn7850-pmu {
compatible = "qcom,wcn7850-pmu";
@@ -753,6 +734,63 @@ retimer_ss2_con_sbu_out: endpoint {
};
};
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
&i2c5 {
clock-frequency = <400000>;
@@ -1102,9 +1140,7 @@ edp_bl_reg_en: edp-bl-reg-en-state {
pins = "gpio10";
function = "normal";
};
-};
-&pmc8380_3_gpios {
pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
pins = "gpio8";
function = "normal";
@@ -1470,7 +1506,7 @@ &usb_1_ss0_hsphy {
};
&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ remote-endpoint = <&retimer_ss0_ss_in>;
};
&usb_1_ss1_dwc3_hs {
--
2.34.1On 26-02-02 15:35:48, YijieYang wrote: > From: Yijie Yang <yijie.yang@oss.qualcomm.com> > > The PURWA-IOT-EVK is an evaluation platform for IoT products, composed of > the Purwa IoT SoM and a carrier board. Together, they form a complete > embedded system capable of booting to UART. > > PURWA-IOT-EVK uses the PS8833 as a retimer for USB0, unlike HAMOA-IOT-EVK. > Meanwhile, USB0 bypasses the SBU selector FSUSB42. > > Make the following peripherals on the carrier board enabled: > - UART > - On-board regulators > - USB Type-C mux > - Pinctrl > - Embedded USB (EUSB) repeaters > - NVMe > - pmic-glink > - USB DisplayPorts > - Bluetooth > - WLAN > - Audio > - PCIe ports for PCIe3 through PCIe6a > - TPM > > Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
On 2/2/26 8:35 AM, YijieYang wrote: > From: Yijie Yang <yijie.yang@oss.qualcomm.com> > > The PURWA-IOT-EVK is an evaluation platform for IoT products, composed of > the Purwa IoT SoM and a carrier board. Together, they form a complete > embedded system capable of booting to UART. > > PURWA-IOT-EVK uses the PS8833 as a retimer for USB0, unlike HAMOA-IOT-EVK. > Meanwhile, USB0 bypasses the SBU selector FSUSB42. > > Make the following peripherals on the carrier board enabled: > - UART > - On-board regulators > - USB Type-C mux > - Pinctrl > - Embedded USB (EUSB) repeaters > - NVMe > - pmic-glink > - USB DisplayPorts > - Bluetooth > - WLAN > - Audio > - PCIe ports for PCIe3 through PCIe6a > - TPM > > Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Konrad
© 2016 - 2026 Red Hat, Inc.