Enable ADSP and CDSP on Kaanapali MTP board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index 32a082598434..3544f744fd1d 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -684,6 +684,20 @@ &pcie_port0 {
 	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/kaanapali/adsp.mbn",
+			"qcom/kaanapali/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/kaanapali/cdsp.mbn",
+			"qcom/kaanapali/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
 &sdhc_2 {
 	cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
 

-- 
2.25.1