The OPP table for the Iris core is wrong, it copies the VDD table from
the downstream kernel, but that table is written for the
video_cc_mvs0_clk_src, while the upstream uses video_cc_mvs0_clk for OPP
rate setting (which is clk_src divided by 3). Specify correct
frequencies in the OPP table.
Fixes: fa245b3f06cd ("arm64: dts: qcom: sm8250: Add venus DT node")
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 531470506809..21a186e199a5 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4350,26 +4350,26 @@ venus: video-codec@aa00000 {
venus_opp_table: opp-table {
compatible = "operating-points-v2";
- opp-720000000 {
- opp-hz = /bits/ 64 <720000000>;
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
required-opps = <&rpmhpd_opp_low_svs>,
<&rpmhpd_opp_low_svs>;
};
- opp-1014000000 {
- opp-hz = /bits/ 64 <1014000000>;
+ opp-338000000 {
+ opp-hz = /bits/ 64 <338000000>;
required-opps = <&rpmhpd_opp_low_svs>,
<&rpmhpd_opp_svs>;
};
- opp-1098000000 {
- opp-hz = /bits/ 64 <1098000000>;
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
required-opps = <&rpmhpd_opp_svs>,
<&rpmhpd_opp_svs_l1>;
};
- opp-1332000000 {
- opp-hz = /bits/ 64 <1332000000>;
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
required-opps = <&rpmhpd_opp_svs>,
<&rpmhpd_opp_nom>;
};
--
2.47.3