The RTC's address is after UARTs, however the node is currently before
them.

Re-order the node to match address sequence.

Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
---
 arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index ee71045883e7e..5269bf0f789b0 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -19,13 +19,6 @@ pic: interrupt-controller@10000000 {
 			#interrupt-cells = <2>;
 		};
 
-		rtc0: rtc@100d0100 {
-			compatible = "loongson,ls7a-rtc";
-			reg = <0 0x100d0100 0 0x78>;
-			interrupt-parent = <&pic>;
-			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		ls7a_uart0: serial@10080000 {
 			compatible = "ns16550a";
 			reg = <0 0x10080000 0 0x100>;
@@ -65,6 +58,13 @@ ls7a_uart3: serial@10080300 {
 			no-loopback-test;
 		};
 
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls7a-rtc";
+			reg = <0 0x100d0100 0 0x78>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pci@1a000000 {
 			compatible = "loongson,ls7a-pci";
 			device_type = "pci";
-- 
2.52.0