[PATCH v2 4/6] drm/mcde: dsi: convert to of_drm_find_and_get_bridge()

Luca Ceresoli posted 6 patches 1 week, 2 days ago
[PATCH v2 4/6] drm/mcde: dsi: convert to of_drm_find_and_get_bridge()
Posted by Luca Ceresoli 1 week, 2 days ago
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.

We need to handle the two cases: when a panel is found and when it isn't,
even though the latter is not supported. So:

 * in case a panel is not found and bridge is, get a reference to the
   found bridge
 * in case a panel is found, get a reference to the panel_bridge when it
   is added, so the following code always get exactly one reference that
   it needs to put

Finally, use the next_bridge pointer in struct drm_bridge in order to
simplify putting the reference.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---

Changes in v2:
- Removed drm_bridge_put(), not needed after the previous patch changes:
  the loop cannot assign 'bridge' more than once now
- Not added Linus' R-by because of this change
---
 drivers/gpu/drm/mcde/mcde_dsi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
index 5893fd2681b3..47d45897ed06 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -40,7 +40,6 @@ struct mcde_dsi {
 	struct mcde *mcde;
 	struct drm_bridge bridge;
 	struct drm_panel *panel;
-	struct drm_bridge *bridge_out;
 	struct mipi_dsi_host dsi_host;
 	struct mipi_dsi_device *mdsi;
 	const struct drm_display_mode *mode;
@@ -1060,7 +1059,7 @@ static int mcde_dsi_bridge_attach(struct drm_bridge *bridge,
 	}
 
 	/* Attach the DSI bridge to the output (panel etc) bridge */
-	return drm_bridge_attach(encoder, d->bridge_out, bridge, flags);
+	return drm_bridge_attach(encoder, d->bridge.next_bridge, bridge, flags);
 }
 
 static const struct drm_bridge_funcs mcde_dsi_bridge_funcs = {
@@ -1076,7 +1075,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 	struct mcde_dsi *d = dev_get_drvdata(dev);
 	struct device_node *child;
 	struct drm_panel *panel = NULL;
-	struct drm_bridge *bridge = NULL;
+	struct drm_bridge *bridge __free(drm_bridge_put) = NULL;
 
 	if (!of_get_available_child_count(dev->of_node)) {
 		dev_info(dev, "unused DSI interface\n");
@@ -1109,7 +1108,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 				PTR_ERR(panel));
 			panel = NULL;
 
-			bridge = of_drm_find_bridge(child);
+			bridge = of_drm_find_and_get_bridge(child);
 			if (!bridge) {
 				dev_err(dev, "failed to find bridge\n");
 				of_node_put(child);
@@ -1129,6 +1128,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 			dev_err(dev, "error adding panel bridge\n");
 			return PTR_ERR(bridge);
 		}
+		drm_bridge_get(bridge);
 		dev_info(dev, "connected to panel\n");
 		d->panel = panel;
 	} else if (bridge) {
@@ -1140,7 +1140,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 		return -ENODEV;
 	}
 
-	d->bridge_out = bridge;
+	d->bridge.next_bridge = drm_bridge_get(bridge);
 
 	/* Create a bridge for this DSI channel */
 	d->bridge.of_node = dev->of_node;
@@ -1160,7 +1160,7 @@ static void mcde_dsi_unbind(struct device *dev, struct device *master,
 	struct mcde_dsi *d = dev_get_drvdata(dev);
 
 	if (d->panel)
-		drm_panel_bridge_remove(d->bridge_out);
+		drm_panel_bridge_remove(d->bridge.next_bridge);
 	regmap_update_bits(d->prcmu, PRCM_DSI_SW_RESET,
 			   PRCM_DSI_SW_RESET_DSI0_SW_RESETN, 0);
 }

-- 
2.52.0
Re: [PATCH v2 4/6] drm/mcde: dsi: convert to of_drm_find_and_get_bridge()
Posted by Linus Walleij 6 days, 17 hours ago
On Sat, Jan 31, 2026 at 4:59 PM Luca Ceresoli <luca.ceresoli@bootlin.com> wrote:

> of_drm_find_bridge() is deprecated. Move to its replacement
> of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
> is put when done.
>
> We need to handle the two cases: when a panel is found and when it isn't,
> even though the latter is not supported. So:
>
>  * in case a panel is not found and bridge is, get a reference to the
>    found bridge
>  * in case a panel is found, get a reference to the panel_bridge when it
>    is added, so the following code always get exactly one reference that
>    it needs to put
>
> Finally, use the next_bridge pointer in struct drm_bridge in order to
> simplify putting the reference.
>
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

Reviewed-by: Linus Walleij <linusw@kernel.org>

Yours,
Linus Walleij