The "aio_aio12_8" driver uses an admin-supplied configuration option
(`it->options[0]`) to configure the I/O port base address of a supported
board (AIO12-8, AI12-8, or AO12-4).  It currently allows any base
address to be configured but the hardware only supports base addresses
(set by on-board jumpers) in the range 0x100 to 0x3C0 on 32-byte
boundaries.

Add a sanity check to ensure the device is not configured at an
unsupported base address.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/comedi/drivers/aio_aio12_8.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c
index 227a86a3a760..1d9e14981928 100644
--- a/drivers/comedi/drivers/aio_aio12_8.c
+++ b/drivers/comedi/drivers/aio_aio12_8.c
@@ -202,7 +202,8 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
 	struct comedi_subdevice *s;
 	int ret;
 
-	ret = comedi_request_region(dev, it->options[0], 32);
+	ret = comedi_check_request_region(dev, it->options[0], 32,
+					  0x100, 0x3ff, 32);
 	if (ret)
 		return ret;
 
-- 
2.51.0