The "ni_atmio" driver uses an admin-supplied configuration option
(`it->options[0]`) to configure the I/O port base address of an AT E
Series board.  Or, if the option value is zero, it can search ISA PNP
devices to look for a compatible board.  If the base address is
configured manually, it currently allows any base address to be
configured but the hardware only supports base addresses (configured by
a configuration utility and stored in nonvolatile memory) in the range
0x20 to 0xFFE0 on 32-byte boundaries.

Add a sanity check to ensure the device is not configured at an
unsupported base address.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/comedi/drivers/ni_atmio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/comedi/drivers/ni_atmio.c b/drivers/comedi/drivers/ni_atmio.c
index b4e759e5703f..7bc336333ace 100644
--- a/drivers/comedi/drivers/ni_atmio.c
+++ b/drivers/comedi/drivers/ni_atmio.c
@@ -311,7 +311,8 @@ static int ni_atmio_attach(struct comedi_device *dev,
 		comedi_set_hw_dev(dev, &isapnp_dev->dev);
 	}
 
-	ret = comedi_request_region(dev, iobase, 0x20);
+	ret = comedi_check_request_region(dev, iobase, 0x20,
+					  0x20, 0xffff, 32);
 	if (ret)
 		return ret;
 
-- 
2.51.0