The "das08_isa" driver uses an admin-supplied configuration option
(`it->options[0]`) to configure the I/O port base address of a supported
board in the DAS08 family.  It currently allows any base address to be
configured but the hardware only supports base addresses (configured by
an on-board DIP switch) in the range 0 to 0x3f0 on 16-byte boundaries.
(Technically, the DIP switches allow 8-byte boundaries, but I do not
think that is advisable given that the boards decode an 16-byte address
range.)

Add a sanity check to ensure the device is not configured at an
unsupported base address.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/comedi/drivers/das08_isa.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/comedi/drivers/das08_isa.c b/drivers/comedi/drivers/das08_isa.c
index 3d43b77cc9f4..1b022dc10b78 100644
--- a/drivers/comedi/drivers/das08_isa.c
+++ b/drivers/comedi/drivers/das08_isa.c
@@ -167,7 +167,8 @@ static int das08_isa_attach(struct comedi_device *dev,
 	if (!devpriv)
 		return -ENOMEM;
 
-	ret = comedi_request_region(dev, it->options[0], board->iosize);
+	ret = comedi_check_request_region(dev, it->options[0], board->iosize,
+					  0, 0x3ff, board->iosize);
 	if (ret)
 		return ret;
 
-- 
2.51.0