Since commit 9e53a66a2f2f ("soundwire: qcom: deprecate qcom,din/out-ports"),
the ports are checked against the actul hardware configuration, leading to:
qcom-soundwire 6ad0000.soundwire: din-ports (0) mismatch with controller (1)
qcom-soundwire 6d30000.soundwire: dout-ports (0) mismatch with controller (1)
Fix the ports count and properties of the corresponding soundwire
controllers.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 42 ++++++++++++++++++------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index f8563ec79dc6..3ddb5c3f097c 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4728,18 +4728,18 @@ swr1: soundwire@6ad0000 {
pinctrl-0 = <&rx_swr_active>;
pinctrl-names = "default";
- qcom,din-ports = <0>;
+ qcom,din-ports = <1>;
qcom,dout-ports = <11>;
- qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
- qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
- qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
- qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
- qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
- qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
- qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
- qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
@@ -4825,17 +4825,17 @@ swr2: soundwire@6d30000 {
pinctrl-names = "default";
qcom,din-ports = <4>;
- qcom,dout-ports = <0>;
-
- qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
- qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
- qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
- qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
- qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
- qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
- qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
- qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
+ qcom,dout-ports = <1>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x00 0x01 0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x00 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0x01 0x02 0x00 0x00>;
#address-cells = <2>;
#size-cells = <0>;
--
2.34.1
© 2016 - 2026 Red Hat, Inc.