Add the required node for haptic playback (Awinic AW86938)

Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
 arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
index 52895dd9e4fa117aef6822df230ebf644e5f02ba..881239d22fa97685206d1fa3a70723c5b77a339c 100644
--- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
+++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
@@ -625,7 +625,17 @@ vreg_l7p: ldo7 {
 	};
 
 	/* VL53L3 ToF @ 0x29 */
-	/* AW86938FCR vibrator @ 0x5a */
+
+	vibrator@5a {
+		compatible = "awinic,aw86938";
+		reg = <0x5a>;
+
+		interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&aw86938_int_default>;
+		pinctrl-names = "default";
+	};
 };
 
 &pm8550vs_c {
@@ -755,6 +765,13 @@ sdc2_card_det_n: sdc2-card-det-state {
 		bias-pull-up;
 	};
 
+	aw86938_int_default: aw86938-int-default-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
 	pm8008_int_default: pm8008-int-default-state {
 		pins = "gpio125";
 		function = "gpio";

-- 
2.43.0

On 1/28/26 4:51 PM, Griffin Kroah-Hartman wrote:
> Add the required node for haptic playback (Awinic AW86938)
> 
> Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> index 52895dd9e4fa117aef6822df230ebf644e5f02ba..881239d22fa97685206d1fa3a70723c5b77a339c 100644
> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> @@ -625,7 +625,17 @@ vreg_l7p: ldo7 {
>  	};
>  
>  	/* VL53L3 ToF @ 0x29 */
> -	/* AW86938FCR vibrator @ 0x5a */
> +
> +	vibrator@5a {
> +		compatible = "awinic,aw86938";
> +		reg = <0x5a>;
> +
> +		interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +
> +		pinctrl-0 = <&aw86938_int_default>;

Ideally there'd also be a config for the reset GPIO, but otherwise

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

On Wed, Jan 28, 2026 at 04:51:15PM +0100, Griffin Kroah-Hartman wrote:
> Add the required node for haptic playback (Awinic AW86938)
> 
> Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry