qup0 on sm6125 has 6 SEs and SE4 is used as debug uart. The uart node
and the associated pinctrl are added here.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index e60d4d74c..0540fb865 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -661,6 +661,13 @@ qup_spi9_sleep: qup-spi9-sleep-state {
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -985,6 +992,17 @@ i2c4: i2c@4a90000 {
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x04a90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 		};
 
 		gpi_dma1: dma-controller@4c00000 {

-- 
2.52.0