From: Biswapriyo Nath <nathbappai@gmail.com>

Enable the debug uart node in xiaomi ginkgo exposed as test points.

Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
index 673bc92c7..18aecd9ff 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
@@ -26,6 +26,10 @@ / {
 
 	qcom,msm-id = <QCOM_ID_SM6125 0x10000>;
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -124,6 +128,10 @@ &pon_resin {
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -300,6 +308,10 @@ &tlmm {
 	gpio-reserved-ranges = <0 4>, <30 4>;
 };
 
+&uart4 {
+	status = "okay";
+};
+
 &usb3 {
 	status = "okay";
 };

-- 
2.52.0

On 1/19/26 4:13 PM, Biswapriyo Nath via B4 Relay wrote:
> From: Biswapriyo Nath <nathbappai@gmail.com>
> 
> Enable the debug uart node in xiaomi ginkgo exposed as test points.
> 
> Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

On Mon, Jan 19, 2026 at 03:13:07PM +0000, Biswapriyo Nath via B4 Relay wrote:
> From: Biswapriyo Nath <nathbappai@gmail.com>
> 
> Enable the debug uart node in xiaomi ginkgo exposed as test points.
> 
> Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry