From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Make the dt checker happy by filling out the required properties in
line with the schematics.

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 32 ++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 8fb7d1fc6d56..7ae5f8447b42 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -79,6 +79,18 @@ vreg_3p0: vreg-3p0-regulator {
 		vin-supply = <&vreg_12p0>;
 	};
 
+	vreg_3p3: vreg-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_3P3";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
 	vreg_conn_1p8: vreg_conn_1p8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_conn_1p8";
@@ -95,6 +107,22 @@ vreg_conn_pa: vreg_conn_pa {
 		gpio = <&pmm8654au_1_gpios 6 GPIO_ACTIVE_HIGH>;
 	};
 
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: vreg-wcn-0p95-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_3p3>;
+	};
+
 	wcn6855-pmu {
 		compatible = "qcom,wcn6855-pmu";
 
@@ -104,6 +132,8 @@ wcn6855-pmu {
 		vddio-supply = <&vreg_conn_pa>;
 		vddaon-supply = <&vreg_l2c>;
 		vddpmu-supply = <&vreg_conn_1p8>;
+		vddpmumx-supply = <&vreg_wcn_0p95>;
+		vddpmucx-supply = <&vreg_wcn_0p95>;
 		vddrfa0p95-supply = <&vreg_l2c>;
 		vddrfa1p3-supply = <&vreg_l6e>;
 		vddrfa1p9-supply = <&vreg_s5a>;
@@ -982,6 +1012,8 @@ bluetooth {
 		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
 	};
 };
 

-- 
2.52.0