From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
The PHY is however physically laid out as if it were to, since there
are two separate ports (A/B).

Split out a new if-then block to un-require the bifurcation register
handle to squash this warning:

purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property

Fixes: 2e1ffd4c1805 ("dt-bindings: phy: qcom,qmp-pcie: Add X1P42100 PCIe Gen4x4 PHY")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/176857775469.1631885.16133311938753588148.robh@kernel.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 3a35120a77ec..431e8cb5df84 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -136,13 +136,22 @@ allOf:
           items:
             - description: port a
             - description: port b
-      required:
-        - qcom,4ln-config-sel
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
+    then:
+      required:
+        - qcom,4ln-config-sel
+
   - if:
       properties:
         compatible:

---
base-commit: 46fe65a2c28ecf5df1a7475aba1f08ccf4c0ac1b
change-id: 20260119-topic-purwa_phy_shutup_warning-891e8aab29f2

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

On 19/01/2026 12:48, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
> The PHY is however physically laid out as if it were to, since there
> are two separate ports (A/B).
> 
> Split out a new if-then block to un-require the bifurcation register
> handle to squash this warning:
> 
> purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property

Warning does not exist in the kernel, so please do not reference it.

> 
> Fixes: 2e1ffd4c1805 ("dt-bindings: phy: qcom,qmp-pcie: Add X1P42100 PCIe Gen4x4 PHY")
> Reported-by: Rob Herring <robh@kernel.org>
> Closes: https://lore.kernel.org/linux-arm-msm/176857775469.1631885.16133311938753588148.robh@kernel.org/
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index 3a35120a77ec..431e8cb5df84 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -136,13 +136,22 @@ allOf:
>            items:
>              - description: port a
>              - description: port b
> -      required:
> -        - qcom,4ln-config-sel
>      else:
>        properties:
>          reg:
>            maxItems: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> +              - qcom,x1e80100-qmp-gen4x4-pcie-phy
Best regards,
Krzysztof

On 1/19/26 3:50 PM, Krzysztof Kozlowski wrote:
> On 19/01/2026 12:48, Konrad Dybcio wrote:
>> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>
>> Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
>> The PHY is however physically laid out as if it were to, since there
>> are two separate ports (A/B).
>>
>> Split out a new if-then block to un-require the bifurcation register
>> handle to squash this warning:
>>
>> purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property
> 
> Warning does not exist in the kernel, so please do not reference it.

Only because no Purwa-based device enables it, so I think it's valid

If you really want to, I can resend with that mention removed

Konrad