[v3] Add device tree support for NXP i.MX95 15x15 FRDM board

[PATCH v3 0/2] Add device tree support for NXP i.MX95 15x15 FRDM board

Posted by Lei Xu 3 weeks, 1 day ago

The NXP i.MX95 15x15 FRDM board is a compact and cost-effective
development board based on the i.MX95 applications processor.

This patch set adds device tree support for the board:
 - Patch 1 introduces the DT compatible string.
 - Patch 2 provides the complete device tree description.

Signed-off-by: Lei Xu <lei.xu@nxp.com>
---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.
- Link to v2: https://lore.kernel.org/r/20251217-127-v2-0-67cb12e56242@nxp.com

Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

Link to v1: https://lore.kernel.org/r/20251207-127-v1-0-5a2eeb69f150@nxp.com

---
Lei Xu (2):
      dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
      arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 964 +++++++++++++++++++++
 3 files changed, 966 insertions(+)
---
base-commit: 6987d58a9cbc5bd57c983baa514474a86c945d56
change-id: 20251207-127-4e8551e8bdaf

Best regards,
-- 
Lei Xu <lei.xu@nxp.com>

Re: [PATCH v3 0/2] Add device tree support for NXP i.MX95 15x15 FRDM board

Posted by Shawn Guo 2 weeks, 6 days ago

On Fri, Jan 16, 2026 at 12:56:12AM -0800, Lei Xu wrote:
> The NXP i.MX95 15x15 FRDM board is a compact and cost-effective
> development board based on the i.MX95 applications processor.
> 
> This patch set adds device tree support for the board:
>  - Patch 1 introduces the DT compatible string.
>  - Patch 2 provides the complete device tree description.
> 
> Signed-off-by: Lei Xu <lei.xu@nxp.com>
> ---
> Changes in v3:
> - Add a blank line between the cpu and codec node definitions.
> - Link to v2: https://lore.kernel.org/r/20251217-127-v2-0-67cb12e56242@nxp.com
> 
> Changes in v2:
> - Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
> - Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
> - Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.
> 
> Link to v1: https://lore.kernel.org/r/20251207-127-v1-0-5a2eeb69f150@nxp.com
> 
> ---
> Lei Xu (2):
>       dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
>       arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

Applied both, thanks!