Dell Precision Tower workstations have 5 fan connectors, but the
driver was limited to 4 fans after commit dbcfcb239b3b ("hwmon:
(dell-smm) Increment the number of fans").

This patch increases DELL_SMM_NO_FANS to 5 and adds the necessary
hwmon channel info for the fifth fan and its PWM control.

Without this patch, the PCIe/GPU cooling fan (fan 5) is not
controllable, which can lead to overheating on systems with
high-power fanless GPUs that depend on chassis cooling.

Tested on Dell Precision Tower 5810 (BIOS A34) with all 5 fans
responding correctly to PWM control.

Fan mapping for Precision Tower 5810:
- fan0: CPU heatsink
- fan1: Second CPU (dual-CPU systems only)
- fan2: Right DIMM bank
- fan3: Left DIMM bank
- fan4: PCIe/GPU cooling

Signed-off-by: Andrew Mark <android606@gmail.com>
---
v2:
 - Removed DMI quirks changes. Setting fan type names in sensors3 config
   instead.
 
 drivers/hwmon/dell-smm-hwmon.c | 5 +++++
 1 file changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 6040a8940..88263fa53 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -74,7 +74,7 @@
 #define DELL_SMM_LEGACY_EXECUTE	0x1
 
 #define DELL_SMM_NO_TEMP	10
-#define DELL_SMM_NO_FANS	4
+#define DELL_SMM_NO_FANS	5
 
 /* limit fan multiplier to avoid overflow */
 #define DELL_SMM_MAX_FAN_MULT (INT_MAX / U16_MAX)
@@ -1129,12 +1129,15 @@ static const struct hwmon_channel_info * const dell_smm_info[] = {
 			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
 			   HWMON_F_TARGET,
 			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
+			   HWMON_F_TARGET,
+			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
 			   HWMON_F_TARGET
 			   ),
 	HWMON_CHANNEL_INFO(pwm,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE
 			   ),
 	NULL
-- 
2.43.0

On Wed, 14 Jan 2026 02:54:57 +0000
Andrew Mark <android606@gmail.com> wrote:

> Dell Precision Tower workstations have 5 fan connectors, but the
> driver was limited to 4 fans after commit dbcfcb239b3b ("hwmon:
> (dell-smm) Increment the number of fans").
> 
> This patch increases DELL_SMM_NO_FANS to 5 and adds the necessary
> hwmon channel info for the fifth fan and its PWM control.
> 
> Without this patch, the PCIe/GPU cooling fan (fan 5) is not
> controllable, which can lead to overheating on systems with
> high-power fanless GPUs that depend on chassis cooling.
> 
> Tested on Dell Precision Tower 5810 (BIOS A34) with all 5 fans
> responding correctly to PWM control.
> 
> Fan mapping for Precision Tower 5810:
> - fan0: CPU heatsink
> - fan1: Second CPU (dual-CPU systems only)
> - fan2: Right DIMM bank
> - fan3: Left DIMM bank
> - fan4: PCIe/GPU cooling
> 
> Signed-off-by: Andrew Mark <android606@gmail.com>
> ---
> v2:
>  - Removed DMI quirks changes. Setting fan type names in sensors3 config
>    instead.
>  
>  drivers/hwmon/dell-smm-hwmon.c | 5 +++++
>  1 file changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 6040a8940..88263fa53 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -74,7 +74,7 @@
>  #define DELL_SMM_LEGACY_EXECUTE	0x1
>  
>  #define DELL_SMM_NO_TEMP	10
> -#define DELL_SMM_NO_FANS	4
> +#define DELL_SMM_NO_FANS	5
>  
>  /* limit fan multiplier to avoid overflow */
>  #define DELL_SMM_MAX_FAN_MULT (INT_MAX / U16_MAX)
> @@ -1129,12 +1129,15 @@ static const struct hwmon_channel_info * const dell_smm_info[] = {
>  			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
>  			   HWMON_F_TARGET,
>  			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
> +			   HWMON_F_TARGET,
> +			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX |
>  			   HWMON_F_TARGET

I'd have used a different indentation rule to get each value on one line...

>  			   ),
>  	HWMON_CHANNEL_INFO(pwm,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
> +			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE
>  			   ),

That code is just crying out for:
#define HWMON_CHANNEL_INFO_N(stype, count, val) \
	HWMON_CHANNEL_INFO(stype, [0 ... (count) - 1] = val)
so you can do:
	HWMON_CHANNEL_INFO_N(pwm, DELL_SMM_NO_FANS,
			HWMON_PWM_INPUT | HWMON_PWM_ENABLE)

	David


>  	NULL